SLVSBD1B December 2012 – August 2025 TPS65175
PRODUCTION DATA
All outputs are programmable using a two-wire interface.
| Boost Converter (VDD) | |
| Output voltage selection:
programmable with I2C Number of bits: 6 Output voltage range: 12.7V…19V Step size: 100 mV |
|
| Boost Converter Frequency (VDD Freq.) | |
| Frequency Selection: programmable
with I2C Number of bits: 1 Frequencies: 750 kHz, 1.5 MHz |
|
| Buck Converter (VCC) | |
| Output voltage selection:
programmable with I2C Number of bits: 4 Output voltage range: 1.6V…2.0V & 3.0V…3.6V Step size: 100 mV |
|
| Buck Converter Frequency (VCC Freq.) | |
| Frequency Selection: programmable
with I2C Number of bits: 1 Frequencies: 750 kHz, 1.5 MHz |
|
| Synchronous Buck Converter (HVDD) | |
| Output voltage selection: not
possible (VDD tracking) Number of bits: - Output voltage range: VDD/2 Step size: 50 mV |
|
| Positive Charge Pump Controller (VGH_LT – low temperature) | |
| Output voltage selection:
programmable with I2C Number of bits: 4 Output voltage range: 19V…34V Step size: 1 V |
|
| Positive Charge Pump Controller (VGL_HT - high temperature) | |
| Output voltage selection:
programmable with I2C Number of bits: 4 Output voltage range: 17V…32V Step size: 1 V |
|
| Negative Charge Pump (VGL) | |
| Output voltage
selection: programmable with I2C Number of bits: 4 Output voltage range: –1.8V…–8.1V Step size: 100 mV |
|
| Gamma Buffer (VGMA1,2,3) - (VDD dependency) | |
| Output voltage
selection: programmable with I2C Number of bits: 9 Output voltage range: VDD/2…VDD (512 steps) Step size: VDD/1023 |
|
| Gamma Buffer (VGMA4,5,6) - (VDD dependency) | |
| Output voltage
selection: programmable with I2C Number of bits: 9 Output voltage range: 0V…VDD/2 (512 steps) Step size: VDD/1-23 |
|
| Vcom Reference (VPOS) - (VDD dependency) | |
| Output voltage
selection: programmable with I2C Number of bits: 9 Output voltage range 1: (VDD/1023)*250V ... (VDD/1023)*640V (391 steps) Output voltage range 2: (VDD/1023)*310V ... (VDD/1023)*520V (211 steps) Step size: VDD/1023 |
|
| Vcom Gain | |
| Gain level selection:
programmable with I2C Number of bits: 3 Gain levels: Buffer, –1x,–2x,–3x, –4x, –5x |
|
| Vcom Temperature Compensation Offset (VCOM_OFFSET) - (VPOS dependency) | |
| Output offset:
programmable with I2C Number of bits: 4 Output voltage range: 0V…(VDD/1023)*30V (16 steps) Gain levels: Buffer, –1x,–2x,–3x, –4x, –5x |
|
| Vcom Temperature Change Range | |
| Range selection:
programmable with I2C Number of bits: 2 Temperature ranges: 50°C ~ 60°C, 55°C ~ 65°C, 60°C ~ 70°C, 65°C ~ 75°C |
|