8.2.2 Detailed Design Procedure
The following general design procedure is recommended:
- Select a suitable power supply voltage for the LMH1226. See Power Supply Recommendations for details.
- Check that the power supply meets the DC and AC requirements in Recommended Operating Conditions.
- Select the proper pull-high or pull-low resistors for IN_OUT_SEL and OUT_CTRL for setting the signal path.
- Depending on the length and insertion loss of the output traces for OUT0± and OUT1±, select the proper pull-high or pull-low resistors for VOD_DE to set the output amplitude and de-emphasis settings. Refer to Table 5 for details.
- Follow all design requirements detailed in Table 9 to optimize LMH1226 performance.
- For additional layout recommendations, refer to PCB Layout Guidelines.