ZHCSF47E June 2016 – December 2017 TAS2560
PRODUCTION DATA.
請參考 PDF 數(shù)據(jù)表獲取器件具體的封裝圖。
Sets the interrupt mask flags.
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| INTM_OVRI | INTM_AUV | INTM_CLK2 | INTM_OVRT | INTM_BRNO | INTM_CLK1 | INTM_MCHLT | INT_WCHLT |
| RW-0h | RW-0h | RW-0h | RW-0h | RW-0h | RW-0h | RW-0h | RW-0h |
| LEGEND: R/W = Read/Write; R = Read only; -n = value after reset |
| Bit | Field | Type | Reset | Description |
|---|---|---|---|---|
| 7 | INTM_OVRI | RW | 0h | Sets the interrupt mask flag for the speaker over current detected to
0 = Clear (not used) 1 = Set (used) |
| 6 | INTM_AUV | RW | 0h | Sets the interrupt mask flag for the analog under voltage detected to
0 = Clear (not used) 1 = Set (used) |
| 5 | INTM_CLK2 | RW | 0h | Sets the interrupt mask flag for the clock error 2 detected to
0 = Clear (not used) 1 = Set (used) |
| 4 | INTM_OVRT | RW | 0h | Sets the interrupt mask flag for the die over-temperature detected to
0 = Clear (not used) 1 = Set (used) |
| 3 | INTM_BRNO | RW | 0h | Sets the interrupt mask flag for the brownout detected to
0 = Clear (not used) 1 = Set (used) |
| 2 | INTM_CLK1 | RW | 0h | Sets the interrupt mask flag for the clock error 1 detected to
0 = Clear (not used) 1 = Set (used) |
| 1 | INTM_MCHLT | RW | 0h | Sets the interrupt mask flag for the modulator clock halt detected to
0 = Clear (not used) 1 = Set (used) |
| 0 | INT_WCHLT | RW | 0h | Sets the interrupt mask flag for the WCLK clock halt detected to
0 = Clear (not used) 1 = Set (used) |