ZHCSGX1G May 2004 – February 2025 LM60
PRODUCTION DATA
- 1
- 1 特性
- 2 應用
- 3 說明
- 4 Device Comparison
- 5 Pin Configuration and Functions
- 6 Specifications
- 7 Detailed Description
- 8 Application and Implementation
- 9 Device and Documentation Support
- 10Revision History
- 11Mechanical, Packaging, and Orderable Information
6.6 Typical Characteristics
To generate these curves, the device is mounted to a printed-circuit board as shown in Figure 8-9 or Figure 8-10.
Figure 6-1 Thermal Resistance Junction to Air (Legacy chip)
Figure 6-3 Thermal Response in Still Air With Heat Sink (Legacy chip)
Figure 6-5 Thermal Response in Stirred Oil Bath With Heat Sink (0.5 inches × 0.5 inches PCB board)
Figure 6-7 Thermal Response in Still Air Without a Heat Sink (Legacy chip)
Figure 6-9 Start-Up Voltage vs Temperature (Legacy chip)
Figure 6-11 Quiescent Current vs Temperature (Legacy chip)
Figure 6-13 Accuracy vs Temperature (Legacy chip)
Figure 6-15 Noise Voltage (Legacy chip)
Figure 6-19 Start-Up Response (Legacy chip)
Figure 6-2 Thermal Time Constant (Legacy chip)
Figure 6-4 Thermal Response in Stirred Oil Bath With Heat Sink (Legacy chip)
Figure 6-6 Thermal Response in Stirred Oil Bath Without Heat Sink
Figure 6-8 Thermal Response in Still Air Without a Heat Sink (Both Legacy and New chip in the new test setup)
Figure 6-10 Start-Up Voltage vs Temperature (New chip)
Figure 6-12 Quiescent Current vs Temperature (New chip)
Figure 6-14 Accuracy vs Temperature (New chip)
Figure 6-16 Noise Voltage (New chip)
Figure 6-18 Supply Current vs Supply Voltage (New chip)
Figure 6-20 Start-Up Response (New chip)