ZHCSJ76A March 2018 – April 2019 DRV8343-Q1
PRODUCTION DATA.
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| GATE DRIVER | ||||
| Power supply pin voltage (VM) | –0.3 | 65 | V | |
| Voltage differential between ground pins (AGND, BGND, DGND, PGND) | –0.3 | 0.3 | V | |
| MOSFET drain sense pin voltage (VDRAIN) | –0.3 | 65 | V | |
| Charge pump pin voltage (CPH, VCP) | –0.3 | VVM + 13.5 | V | |
| Charge-pump negative-switching pin voltage (CPL) | –0.3 | VVM | V | |
| Internal logic regulator pin voltage (DVDD) | –0.3 | 3.8 | V | |
| Voltage difference between VM and VDRAIN | –10 | 10 | V | |
| Digital pin voltage (CAL, ENABLE, GAIN, IDRIVE, INHx, INLx, MODE, nFAULT, nSCS, SCLK, SDI, SDO, VDS, nDIAG) | –0.3 | 5.75 | V | |
| Continuous high-side gate drive pin voltage (GHx) | –5(2) | VVCP + 0.5 | V | |
| Transient 200-ns high-side gate drive pin voltage (GHx) | –7 | VVCP + 0.5 | V | |
| High-side gate drive pin voltage with respect to SHx (GHx) | –0.3 | 13.5 | V | |
| Continuous high-side source sense pin voltage (SHx, DLx) | –5(2) | VVM + 5 | V | |
| Transient 200-ns high-side source sense pin voltage (SHx, DLx) | –7 | VVM + 7 | V | |
| Continuous high-side source sense pin voltage (SHx, DLx) | –5(2) | VDRAIN + 5 | V | |
| Transient 200-ns high-side source sense pin voltage (SHx, DLx) | –7 | VDRAIN + 7 | V | |
| Continuous low-side gate drive pin voltage (GLx) | –0.5 | 15 | V | |
| Gate drive pin source current (GHx, GLx) | Internally limited | A | ||
| Gate drive pin sink current (GHx, GLx) | Internally limited | A | ||
| Continuous low-side source sense pin voltage (SLx) | –1 | 1 | V | |
| Transient 200-ns low-side source sense pin voltage (SLx) | –3 | 3 | V | |
| Continuous shunt amplifier input pin voltage (SNx, SPx) | –1 | 1 | V | |
| Transient 200-ns shunt amplifier input pin voltage (SNx, SPx) | –3 | 3 | V | |
| Reference input pin voltage (VREF) | –0.3 | 5.75 | V | |
| Shunt amplifier output pin voltage (SOx) | –0.3 | VVREF + 0.3 | V | |
| Shunt amplifier output current (SOx) | 0 | 8 | mA | |
| Push-pull output buffer reference voltage (VSDO) | –0.3 | 5.75 | V | |
| Push-pull output current (SDO) | 0 | 10 | mA | |
| Open drain pullup voltage (nFAULT) | –0.3 | 5.75 | V | |
| Open drain output current (nFAULT) | 0 | 10 | mA | |
| Operating junction temperature, TJ | –40 | 150 | °C | |
| Storage temperature, Tstg | –65 | 150 | °C | |