2 Supported Features

• Integration of the CPDMA based EMAC driver for RM46/RM48/RM57/TMS570LS/TMS570LC devices
• lwIP (lightweight IP) 1.4.1 TCP/IP stack ported for the above devices' EMAC driver
• By default, the DHCP support is enabled. However, the integration supports both DHCP and Static IP addressing.
• Integration with HALCoGen v04.07.01 release
• The integrated application demonstrates web server applications on RM46/RM48/RM57/ TMS570LS/TMS570LC devices.
• By default, the software is configured for executing from flash.
• Diagnostic and debug messages are printed on the JTAG SCI Port. The following are the settings for the console:
  • Baud Rate: 9600
  • Data: 8 bit
  • Parity: None
  • Stop bit: 2
  • Flow Control: None

NOTE

Since the MAC Address is part of the binary image, all of the devices programmed with these binaries and connected to the same DHCP server will be assigned the same IP address. The default MAC address is 00:08:EE:03:A6:6C.