| CL |
13 |
13 |
O |
Programmable current-limit pin. Connect to device GND if external current limit is not used. |
| CS |
— |
14 |
O |
Current-sense output. Leave floating if not used. |
| DIAG_EN |
12 |
12 |
I |
Enable and disable pin for diagnostic functions. Connect to device GND if not used. |
| GND |
2 |
2 |
— |
Ground pin |
| IN |
3 |
3 |
I |
Input control for channel activation |
| NC |
1, 4, 11 |
1, 4, 11 |
— |
No-connect pin; leave floating. |
| OUT |
5, 6, 7 |
5, 6, 7 |
O |
Output, connected to load (NMOS source) |
| ST |
14 |
— |
O |
Open-drain diagnostic status output. Leave floating if not used. |
| VS |
8, 9, 10 |
8, 9, 10 |
I |
Power supply; battery voltage |
| Thermal pad |
— |
— |
— |
Thermal pad. Connect to device GND or leave floating. |