6.4.4 Local Reset
The local reset can be used to reset a particular CorePac without resetting any other chip components.
Local reset is initiated by the following (for more details see the Phase-Locked Loop (PLL) for KeyStone Devices User's Guide:
- LRESET pin
- Based on the setting of the CORESEL[2:0] and RSTCFG register in the PLL controller, one of the following should be caused by the watchdog timer. See Section 6.5.2.8 and Section 6.8.2:
- Local Reset
- NMI
- NMI followed by a time delay and then a local reset for the CorePac selected
- Hard Reset by requesting reset through PLLCTL
- LPSC MMRs (memory-mapped registers)