ZHCSB29I September 2009 – October 2019 DS90UR905Q-Q1 , DS90UR906Q-Q1
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 說明 （續）
- 6 Pin Configuration and Functions
-
7 Specifications
- 7.1 Absolute Maximum Ratings
- 7.2 ESD Ratings
- 7.3 Recommended Operating Conditions
- 7.4 Thermal Information
- 7.5 Serializer DC Electrical Characteristics
- 7.6 Deserializer DC Electrical Characteristics
- 7.7 DC and AC Serial Control Bus Characteristics
- 7.8 Timing Requirements for DC and AC Serial Control Bus
- 7.9 Timing Requirements for Serializer PCLK
- 7.10 Timing Requirements for Serial Control Bus
- 7.11 Switching Characteristics: Serializer
- 7.12 Switching Characteristics: Deserializer
- 7.13 Typical Characteristics
-
8 Detailed Description
- 8.1 Overview
- 8.2 Functional Block Diagrams
- 8.3
Feature Description
- 8.3.1 Data Transfer
- 8.3.2 Video Control Signal Filter — Serializer and Deserializer
- 8.3.3 Serializer Functional Description
- 8.3.4
Deserializer Functional Description
- 8.3.4.1 Signal Quality Enhancers
- 8.3.4.2 EMI Reduction Features
- 8.3.4.3 Power-Saving Features
- 8.3.4.4 Deserializer CLOCK-DATA RECOVERY STATUS FLAG (LOCK) and OUTPUT STATE SELECT (OSS_SEL)
- 8.3.4.5 Deserializer Oscillator Output (Optional)
- 8.3.4.6 Deserializer OP_LOW (Optional)
- 8.3.4.7 Deserializer Pixel Clock Edge Select (RFB)
- 8.3.4.8 Deserializer Control Signal Filter (Optional)
- 8.3.4.9 Deserializer Low Frequency Optimization (LF_Mode)
- 8.3.4.10 Deserializer Map Select
- 8.3.4.11 Deserializer Strap Input Pins
- 8.3.4.12 Optional Serial Bus Control
- 8.3.4.13 Optional BIST Mode
- 8.3.5 Built-In Self Test (BIST)
- 8.3.6 Optional Serial Bus Control
- 8.4 Device Functional Modes
- 8.5 Register Maps
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12器件和文檔支持
- 13機械、封裝和可訂購信息
封裝選項
機械數據 (封裝 | 引腳)
- RHS|48
散熱焊盤機械數據 (封裝 | 引腳)
- RHS|48
訂購信息
7.12 Switching Characteristics: Deserializer
over recommended operating supply and temperature ranges unless otherwise specified.| PARAMETERS | TEST CONDITIONS | PIN / FREQ | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|---|
| tRCP | PCLK output period | tRCP = tTCP | PCLK | 15.38 | T | 200 | ns |
| tRDC | PCLK output duty cycle | SSCG=OFF, 5–65 MHz | PCLK | 43% | 50% | 57% | |
| SSCG=ON, 5–20 MHz | 35% | 59% | 65% | ||||
| SSCG=ON, 20–65 MHz | 40% | 53% | 60% | ||||
| tCLH | LVCMOS
Low-to-high transition time, Figure 10 |
VDDIO = 1.8 V, CL = 4 pF | PCLK/RGB[7:0], HS, VS, DE | 2.1 | ns | ||
| VDDIO = 3.3 V, CL = 4 pF | 2.0 | ns | |||||
| tCHL | LVCMOS
High-to-low transition time, Figure 10 |
VDDIO = 1.8 V
CL = 4 pF, OS_PCLK/DATA = L |
PCLK/RGB[7:0], HS, VS, DE | 1.6 | ns | ||
| VDDIO = 3.3 V
CL = 4 pF, OS_PCLK/DATA = H |
1.5 | ns | |||||
| tROS | Data valid before PCLK – set-up time Figure 14 | VDDIO = 1.71 to 1.89 V or 3.0 to 3.6 V
CL = 4pF (lumped load) |
RGB[7:0], HS, VS, DE | 0.27 | 0.45 | T | |
| tROH | Data valid after PCLK – hold time Figure 14 | VDDIO = 1.71 to 1.89 V or 3.0 to 3.6 V
CL = 4pF (lumped load) |
RGB[7:0], HS, VS, DE | 0.4 | 0.55 | T | |
| tDDLT(2) | Deserializer lock time,
Figure 13 |
SSC[3:0] = 0000 (OFF)(1) | PCLK = 5 MHz | 3 | ms | ||
| SSC[3:0] = 0000 (OFF)(1) | PCLK = 65 MHz | 4 | ms | ||||
| SSC[3:0] = ON(1) | PCLK = 5 MHz | 30 | ms | ||||
| SSC[3:0] = ON(1) | PCLK = 65 MHz | 6 | ms | ||||
| tDD | Deserializer delay – latency, Figure 11 | SSC[3:0] = 0000 (OFF)(1) | 139 × T | 140 × T | ns | ||
| tDPJ | Deserializer period jitter | SSC[3:0] = OFF(3)(5)(6) | PCLK = 5 MHz | 975 | 1700 | ps | |
| PCLK = 10 MHz | 500 | 1000 | ps | ||||
| PCLK = 65 MHz | 550 | 1250 | ps | ||||
| tDCCJ | Deserializer cycle-to-cycle jitter | SSC[3:0] = OFF(3)(4)(6) | PCLK = 5 MHz | 675 | 1150 | ps | |
| PCLK = 10 MHz | 375 | 900 | ps | ||||
| PCLK = 65 MHz | 500 | 1150 | ps | ||||
| tIJT | Deserializer input jitter tolerance, Figure 16 | EQ = OFF,
SSCG = OFF, PCLK = 65 MHz |
for jitter freq < 2 MHz | 0.9 | UI | ||
| for jitter freq > 6 MHz | 0.5 | UI | |||||
| BIST Mode | |||||||
| tPASS | BIST PASS valid time,
BISTEN = 1, Figure 17 |
1 | 10 | µs | |||
| SSCG Mode | |||||||
| fDEV | Spread spectrum clocking deviation frequency | Under typical conditions | PCLK = 5 to 65 MHz,
SSC[3:0] = ON |
±0.5% | ±2% | ||
| fMOD | Spread spectrum clocking modulation frequency | Under typical conditions | PCLK = 5 to 65 MHz,
SSC[3:0] = ON |
8 | 100 | kHz | |
(1) tPLD is the time required by the serializer to obtain lock when exiting power-down state with an active PCLK.
(2) tDDLT is the time required by the deserializer to obtain lock when exiting power-down state with an active PCLK.
(3) tDPJ is the maximum amount the period is allowed to deviate over many samples.
(4) tDCCJ is the maximum amount of jitter between adjacent clock cycles.
(5) Specification is ensured by characterization and is not tested in production.
(6) Specification is ensured by design and is not tested in production.
Figure 1. Serializer Test Circuit 
Figure 2. Serializer Output Waveforms 
Figure 3. Serializer Output Transition Times 
Figure 4. Serializer Input PCLK Waveform and Set and Hold Times 
Figure 5. Serializer Lock Time 
Figure 6. Serializer Disable Time 
Figure 7. Serializer Latency Delay 
Figure 8. Serializer Output Jitter 
Figure 9. Checkerboard Data Pattern 
Figure 10. Deserializer LVCMOS Transition Times 
Figure 11. Deserializer Delay – Latency 
Figure 12. Deserializer Disable Time (OSS_SEL = 0) 
Figure 13. Deserializer PLL Lock Times and PDB TRI-STATE Delay 
Figure 15. Deserializer Output Data Valid (Set-up and Hold) Times With SSCG = On 
Figure 16. Receiver Input Jitter Tolerance 
Figure 17. BIST PASS Waveform 
Figure 18. Serial Control Bus Timing Diagram