国产偷国产亚洲偷亚洲高91精品国产高清自在线观看A级大片 ,免费精品日本一区二区三区,欧美亚洲国产电影在线观看

ZHCSLK6B July 2021 – February 2025 TPS1HC100-Q1

PRODUCTION DATA

封裝選項

請參考 PDF 數據表獲取器件具體的封裝圖。

機械數據 (封裝 | 引腳)

PWP|14

散熱焊盤機械數據 (封裝 | 引腳)

PWP|14
- PPTD393A

訂購信息

8.2.2.3 EMC Transient Disturbances Test

Due to the severe electrical conditions in the automotive environment, immunity capacity against electrical transient disturbances is required, especially for a high-side power switch, which is connected directly to the battery. Detailed test requirements are in accordance with the ISO 7637-2:2011 and ISO 16750-2:2010 standards. The TPS1HC100-Q1 device is tested and certificated by a third-party organization.

Table 8-4 ISO 7637-2:2011(E) in 12-V System⁽¹⁾⁽²⁾⁽³⁾⁽⁴⁾

Test Item	Test Pulse Severity Level and vs Accordingly		Pulse Duration (t_d)	Minimum Number of Pulses or Test Time	Burst-Cycle Pulse-Repetition Time		Input Resistance (?)	Function Performance Status Classification
Test Item	Level	Vs/V	Pulse Duration (t_d)	Minimum Number of Pulses or Test Time	MIN	MAX	Input Resistance (?)	Function Performance Status Classification
1	III	–112	2 ms	500 pulses	0.5 s	e s	10	Status II
2a	III	55	50 μs	500 pulses	0.2 s	5 s	2	Status II
2b	IV	10	0.2 to 2 s	10 pulses	0.5 s	5 s	0 to 0.05	Status II
3a	IV	–220	0.1 μs	1h	90 ms	100 ms	50	Status II
3b	IV	150	0.1 μs	1h	90 ms	100 ms	50	Status II

(1) Tested both under input low condition and high condition.

(2) Considering the worst test condition, it is tested without any filter capacitors in V_BB and V_OUT

(3) GND pin network is a 1-kΩ resistor in parallel with a diode BAS21-7-F.

(4) Status II: the function does not perform as designed during the test, but returns automatically to normal operation after the test.

Table 8-5 ISO 16750-2:2010(E) Load Dump Test B in 12-V System⁽¹⁾⁽²⁾⁽³⁾⁽⁴⁾⁽⁵⁾

Test Item	Test Pulse Severity Level and vs Accordingly		Pulse Duration (t_d)	Minimum Number of Pulses or Test Time	Burst- Cycle Pulse-Repetition Time		Input Resistance (?)	Function Performance Status Classification
Test Item	Level	Vs/V	Pulse Duration (t_d)	Minimum Number of Pulses or Test Time	MIN (s)	MAX (s)	Input Resistance (?)	Function Performance Status Classification
Test B		35	40 to 400 ms	5 pulses	60	e	0.5 to 4	Status II

(1) Tested both under input low condition and high condition (DIAG_EN, EN, and VBB are all classified as inputs).

(2) Considering the worst test condition, the device is tested without any filter capacitors on VBB and VOUT.

(3) The GND pin network is a 1-kΩ resistor in parallel with a diode BAS21-7-F.

(4) Status II: the function does not perform as designed during the test, but returns automatically to normal operation after the test.

(5) Select a 39-V external suppressor.