欧美肥妇毛多水多BBXX,GOGO全球大胆高清人体131欧美精品久久一二三区 ,亚洲综合欧美一区二区在线

ZHCSH84A September 2017 – December 2017 SN55HVD233-SP

PRODUCTION DATA.

封裝選項

機械數據 (封裝 | 引腳)

HKX|8
- MCQF026B

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

7.5 Driver Electrical Characteristics

The specifications shown below are valid across temperature range of –55°C to 125°C pre-radiation and 25°C post-radiation. When different, the post-radiation values are shown in a separate row specified by the corresponding RHA level (L = 50 krad).

PARAMETER			TEST CONDITIONS		SUBGROUP⁽²⁾	MIN	TYP⁽¹⁾	MAX	UNIT
V_O(D)	Bus output voltage (dominant)	CANH	V_(D) = 0 V, V_(RS) = 0 V, see Figure 12 and Figure 13		[1, 2, 3]	2.4		V_CC	V
V_O(D)	Bus output voltage (dominant)	CANL	V_(D) = 0 V, V_(RS) = 0 V, see Figure 12 and Figure 13		[1, 2, 3]	0.5		1.25	V
V_O	Bus output voltage (recessive)	CANH	V_(D) = 3 V, V_(RS) = 0 V, see Figure 12 and Figure 13				2.3		V
V_O	Bus output voltage (recessive)	CANL	V_(D) = 3 V, V_(RS) = 0 V, see Figure 12 and Figure 13				2.3		V
V_OD(D)	Differential output voltage (dominant)		V_(D) = 0 V, V_(RS) = 0 V, see Figure 12 and Figure 13		[1, 2, 3]	1.5	2	3	V
			V_(D) = 0 V, V_(RS) = 0 V, see Figure 12 and Figure 13	L	[1, 2, 3]	1.4
			V_(D) = 0 V, V_(RS) = 0 V, see Figure 13 and Figure 14		[1, 2, 3]	1.2	2	3
V_OD	Differential output voltage (recessive)		V_(D) = 3 V, V_(RS) = 0 V, see Figure 12 and Figure 13		[1, 2, 3]	–120		12	mV
V_OD	Differential output voltage (recessive)		V_(D) = 3 V, V_(RS) = 0 V, no load		[1, 2, 3]	–0.5		0.05	V
V_OC(pp)	Peak-to-peak common-mode output voltage		See Figure 20				1		V
I_IH	High-level input current	D, LBK	V_(D) = 2 V		[1, 2, 3]	–30		30	μA
I_IL	Low-level input current	D, LBK	V_(D) = 0.8 V		[1, 2, 3]	–30		30	μA
I_OS	Short-circuit output current		V_(CANH) = –7 V, CANL open, see Figure 23		[1, 2, 3]	–250			mA
			V_(CANH) = 12 V, CANL open, see Figure 23		[1, 2, 3]			1
			V_(CANL) = –7 V, CANH open, see Figure 23		[1, 2, 3]	–1
			V_(CANL) = 12 V, CANH open, see Figure 23		[1, 2, 3]			250
C_O	Output capacitance		See receiver input capacitance
I_IRS(s)	RS input current for standby		V_(RS) = 0.75 V_CC		[1, 2, 3]	–10			μA
I_CC	Supply current	Standby	V_(RS) = V_CC, V_(D) = V_CC, V_(LBK) = 0 V		[1, 2, 3]		200	600	μA
		Dominant	V_(D) = 0 V, no load, V_(LBK) = 0 V, RS = 0 V		[1, 2, 3]			6	mA
		Recessive	V_(D) = V_CC, no load, V_(LBK) = 0 V, V_(RS) = 0 V		[1, 2, 3]			6	mA

(1) All typical values are at 25°C and with a 3.3-V supply.

(2) For subgroup definitions, please see Table 1.