主頁 電源管理 交流/直流和直流/直流控制器（外部 FET）

UC1825-SP

正在供貨

耐輻射 QMLV、30V 輸入、1.5A 雙路輸出 1MHz PWM 控制器

可提供此產品的更新版本

功能與比較器件相同，且具有相同引腳
UC1825B-SP 正在供貨 耐輻射 QMLV、30V 輸入、2A 雙輸出 1MHz PWM 控制器 Improved TID performance (100 krad) with increased max frequency (1 MHz) and dual outputs for half/full-bridge, or push-pull topologies.

產品詳情

Rating Space Topology Boost, Flyback, Forward, Full bridge, Half bridge, Push pull Vin (max) (V) 30 Vin (min) (V) 10 Control mode Current Features Error amplifier, Multi-topology, Soft start, Synchronization pin Operating temperature range (°C) -55 to 125 Duty cycle (max) (%) 80
Rating Space Topology Boost, Flyback, Forward, Full bridge, Half bridge, Push pull Vin (max) (V) 30 Vin (min) (V) 10 Control mode Current Features Error amplifier, Multi-topology, Soft start, Synchronization pin Operating temperature range (°C) -55 to 125 Duty cycle (max) (%) 80
CDIP (J) 16 135.3552 mm2 19.56 x 6.92 LCCC (FK) 20 79.0321 mm2 8.89 x 8.89
  • QML-V Qualified, SMD 5962-87681
  • Rad-Tolerant: 30 kRad (Si) TID(1)
  • Compatible With Voltage- or Current-Mode Topologies
  • Practical Operation Switching Frequencies to 1 MHz
  • 50-ns Propagation Delay-to-Output
  • High-Current Dual Totem Pole Outputs (1.5 A Peak)
  • Wide Bandwidth Error Amplifier
  • Fully Latched Logic With Double-Pulse Suppression
  • Pulse-by-Pulse Current Limiting
  • Soft Start/Maximum Duty-Cycle Control
  • Undervoltage Lockout With Hysteresis
  • Low Start-Up Current (1.1 mA)

(1) Radiation tolerance is a typical value based upon initial device qualification with dose rate = 10 mrad/sec. Radiation Lot Acceptance Testing is available - contact factory for details.
  • QML-V Qualified, SMD 5962-87681
  • Rad-Tolerant: 30 kRad (Si) TID(1)
  • Compatible With Voltage- or Current-Mode Topologies
  • Practical Operation Switching Frequencies to 1 MHz
  • 50-ns Propagation Delay-to-Output
  • High-Current Dual Totem Pole Outputs (1.5 A Peak)
  • Wide Bandwidth Error Amplifier
  • Fully Latched Logic With Double-Pulse Suppression
  • Pulse-by-Pulse Current Limiting
  • Soft Start/Maximum Duty-Cycle Control
  • Undervoltage Lockout With Hysteresis
  • Low Start-Up Current (1.1 mA)

(1) Radiation tolerance is a typical value based upon initial device qualification with dose rate = 10 mrad/sec. Radiation Lot Acceptance Testing is available - contact factory for details.

The UC1825 PWM control device is optimized for high-frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1-V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty-cycle clamp. The logic is fully latched to provide jitter-free operation and prohibit multiple pulses at an output. An undervoltage lockout section with 800 mV of hysteresis assures low start up current. During undervoltage lockout, the outputs are high impedance.

This device features totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is designed as a high level.

The UC1825 PWM control device is optimized for high-frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1-V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty-cycle clamp. The logic is fully latched to provide jitter-free operation and prohibit multiple pulses at an output. An undervoltage lockout section with 800 mV of hysteresis assures low start up current. During undervoltage lockout, the outputs are high impedance.

This device features totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is designed as a high level.
下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

功能與比較器件相似
TPS7H5001-SP 正在供貨 具有同步整流功能的耐輻射、QMLV 和 QMLP、2MHz、雙輸出 PWM 控制器 More feature rich QML-qualified radiation-hardened PWM controller family.
TPS7H5005-SEP 正在供貨 具有同步整流功能的抗輻射、2MHz 雙輸出 PWM 控制器 More feature rich radiation-tolerant PWM controller family for LEO or shorter duration missions

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 13
類型 標題 下載最新的英語版本 日期
* 數據表 High-Speed PWM Controller. 數據表 (Rev. A) 2012年 3月 22日
* SMD UC1825-SP SMD 5962-87681 2016年 7月 8日
* 輻射與可靠性報告 UC1825-SP Radiation Test Report (5962-8768104VEA) 2015年 5月 8日
應用手冊 Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form (Rev. A) PDF | HTML 2025年 11月 5日
應用手冊 重離子軌道環境單粒子效應估算 (Rev. B) PDF | HTML 英語版 (Rev.B) PDF | HTML 2025年 7月 7日
選擇指南 TI Space Products (Rev. K) 2025年 4月 4日
更多文獻資料 TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 2025年 2月 20日
應用手冊 QML flow, its importance, and obtaining lot information (Rev. C) 2023年 8月 30日
應用手冊 單粒子效應置信區間計算 (Rev. A) PDF | HTML 英語版 (Rev.A) PDF | HTML 2022年 12月 2日
電子書 電子產品輻射手冊 (Rev. B) 2022年 5月 7日
應用簡報 Controlling Input Power for Present and Next-Generation Power Controllers PDF | HTML 2020年 12月 14日
應用手冊 DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 2020年 8月 21日
電子書 電子產品輻射手冊 (Rev. A) 2019年 5月 21日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

仿真模型

UC1825 TINA-TI Transient Reference Design

SLUM653.TSC (5219 KB) - TINA-TI Reference Design
下載
仿真模型

UC1825 Unencrypted TINA-TI Transient Spice Model

SLUM673.ZIP (6 KB) - TINA-TI Spice Model
下載
參考設計

PMP22680 — 帶磁反饋的 40W、±15V 反激式參考設計

此參考設計在 40W 下可從 70V 至 120V 直流輸入電壓生成隔離式 ±15V 輸出。該設計使用磁反饋電路來替代光耦合器的功能。
測試報告: PDF
參考設計

PMP23033 — 具有磁反饋的 40W 5V 單開關正向轉換器參考設計

此參考設計在 40W 下從 60V 至 120V 直流輸入電壓生成隔離式 5V 電壓。該設計使用磁反饋電路來替代光耦合器的功能。
測試報告: PDF
封裝 引腳 CAD 符號、封裝和 3D 模型
CDIP (J) 16 Ultra Librarian
LCCC (FK) 20 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻