可提供此產品的更新版本
功能與比較器件相同,但引腳排列有所不同
TPS62410-Q1
- Qualified for Automotive Applications
- High Efficiency—up to 95%
- VIN Range From 2.5 V to 6 V
- 2.25 MHz Fixed Frequency Operation
- Output Current 2 × 800mA
- Adjustable Output Voltage From 0.6 V to VIN
- EasyScale? Optional One Pin Serial Interface for
Dynamic Output Voltage Adjustment - Power Save Mode at Light Load Currents
- 180° Out of Phase Operation
- Output Voltage Accuracy in PWM Mode ±1%
- Typical 32 μA Quiescent Current for both Converters
- 100% Duty Cycle for Lowest Dropout
- Available in a 10-Pin QFN (3×3mm)
EasyScale, PowerPAD are trademarks of Texas Instruments.
The TPS62410 device is a synchronous dual step-down DC-DC converter optimized for battery powered portable applications. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3V or 5V voltage rail.
With an input voltage range of 2.5V to 6V, the TPS62410 is ideal to power portable applications like smart phones, PDAs, and other portable equipment.
With the EasyScale™ serial interface the output voltages can be modified during operation. It therefore supports Dynamic Voltage Scaling for low power DSP and processors.
The TPS62410 operates at 2.25MHz fixed switching frequency and enter the Power Save Mode operation at light load currents to maintain high efficiency over the entire load current range. For low noise applications the devices can be forced into fixed frequency PWM mode by pulling the MODE/DATA pin high. In the shutdown mode, the current consumption is reduced to 1.2µA. The device allows the use of small inductors and capacitors to achieve a small solution size.
The TPS62410 is available in a 10-pin leadless package (3×3mm QFN).
您可能感興趣的相似產品
功能與比較器件相同,但引腳排列有所不同
技術文檔
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
TPS62410Q1-EVM — TPS62410-Q1 3.6V 雙路降壓轉換器評估模塊
TPS62410 Unencrypted PSpice Transient Model Package (Rev. A)
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| VSON (DRC) | 10 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。