可提供此產品的更新版本

open-in-new 比較替代產品
功能與比較器件相同,但引腳排列有所不同
TAC5112 正在供貨 具有 105dB 動態范圍 ADC 和 114dB 動態范圍 DAC 的低功耗、立體聲音頻編解碼器 Improved SNR
TAC5142 正在供貨 具有 103dB 動態范圍 ADC 和 110dB 動態范圍 DAC 的硬件控制立體聲音頻編解碼器 Improved SNR

產品詳情

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R, TDM Control interface I2C Analog inputs 7 Analog outputs 6 Features Headset detect, Matrix mixing, Mono Class-D amplifier, Mono headphone amplifier, Phase-locked loop (PLL) Sampling rate (max) (kHz) 96 Rating Catalog ADC SNR (typ) (dB) 92 DAC SNR (typ) (dB) 97 Operating temperature range (°C) -40 to 85
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R, TDM Control interface I2C Analog inputs 7 Analog outputs 6 Features Headset detect, Matrix mixing, Mono Class-D amplifier, Mono headphone amplifier, Phase-locked loop (PLL) Sampling rate (max) (kHz) 96 Rating Catalog ADC SNR (typ) (dB) 92 DAC SNR (typ) (dB) 97 Operating temperature range (°C) -40 to 85
DSBGA (YZF) 42 12.1875 mm2 3.75 x 3.25 WQFN (RSB) 40 25 mm2 5 x 5
  • Stereo CODEC With Integrated Mono Class-D Amplifier
  • High Performance Audio DAC
    • 97-dBA Signal-to-Noise Ratio (Single Ended)
    • 16/20/24/32-Bit Data
    • Supports Sample Rates From 8 kHz to 96 kHz
    • 3D/Bass/Treble/EQ/De-Emphasis Effects
    • Flexible Power Saving Modes and Performance
      are Available
  • High Performance Audio ADC
    • 92-dBA Signal-to-Noise Ratio
    • Supports Rates From 8 kHz to 96 kHz
    • Digital Signal Processing and Noise Filtering Available
      During Record
  • Seven Audio Input Pins
    • Programmable as 6 Single-Ended or 3 Fully Differential
      Inputs
    • Capability for Floating Input Configurations
  • Multiple Audio Output Drivers
    • Mono Fully Differential or Stereo Single-Ended
      Headphone Drivers
    • Single-Ended Stereo Line Outputs
  • Mono 1 W Class-D BTL 8Ω Speaker Driver
  • Low Power Consumption: 15-mW Stereo 48-kHz Playback
    With 3.3-V Analog Supply
  • Ultra-Low Power Mode with Passive Analog Bypass
  • Programmable Input/Output Analog Gains
  • Automatic Gain Control (AGC) for Record
  • Programmable Microphone Bias Level
  • Programmable PLL for Flexible Clock Generation
  • I2C Control Bus
  • Audio Serial Data Bus Supports I2S,
    Left/Right-Justified, DSP, and TDM Modes
  • Extensive Modular Power Control
  • Power Supplies:
    • Speaker Amp: 2.7 V – 5.5 V
    • Analog: 2.7 V – 3.6 V.
    • Digital Core: 1.525 V – 1.95 V
    • Digital I/O: 1.1 V – 3.6 V
  • Packages: 5-mm × 5-mm 40-QFN, 0.4-mm Pitch
    3.563-mm × 3.376-mm 42-DSBGA, 0.5 mm Pitch
    (Product Preview)
  • Stereo CODEC With Integrated Mono Class-D Amplifier
  • High Performance Audio DAC
    • 97-dBA Signal-to-Noise Ratio (Single Ended)
    • 16/20/24/32-Bit Data
    • Supports Sample Rates From 8 kHz to 96 kHz
    • 3D/Bass/Treble/EQ/De-Emphasis Effects
    • Flexible Power Saving Modes and Performance
      are Available
  • High Performance Audio ADC
    • 92-dBA Signal-to-Noise Ratio
    • Supports Rates From 8 kHz to 96 kHz
    • Digital Signal Processing and Noise Filtering Available
      During Record
  • Seven Audio Input Pins
    • Programmable as 6 Single-Ended or 3 Fully Differential
      Inputs
    • Capability for Floating Input Configurations
  • Multiple Audio Output Drivers
    • Mono Fully Differential or Stereo Single-Ended
      Headphone Drivers
    • Single-Ended Stereo Line Outputs
  • Mono 1 W Class-D BTL 8Ω Speaker Driver
  • Low Power Consumption: 15-mW Stereo 48-kHz Playback
    With 3.3-V Analog Supply
  • Ultra-Low Power Mode with Passive Analog Bypass
  • Programmable Input/Output Analog Gains
  • Automatic Gain Control (AGC) for Record
  • Programmable Microphone Bias Level
  • Programmable PLL for Flexible Clock Generation
  • I2C Control Bus
  • Audio Serial Data Bus Supports I2S,
    Left/Right-Justified, DSP, and TDM Modes
  • Extensive Modular Power Control
  • Power Supplies:
    • Speaker Amp: 2.7 V – 5.5 V
    • Analog: 2.7 V – 3.6 V.
    • Digital Core: 1.525 V – 1.95 V
    • Digital I/O: 1.1 V – 3.6 V
  • Packages: 5-mm × 5-mm 40-QFN, 0.4-mm Pitch
    3.563-mm × 3.376-mm 42-DSBGA, 0.5 mm Pitch
    (Product Preview)

The TLV320AIC3107 is a low power stereo audio codec with stereo headphone amplifier, and mono class-D speaker driver, as well as multiple inputs and outputs programmable in single-ended or fully differential configurations.

Extensive register-based power control is included, enabling stereo 48-kHz DAC playback as low as 15 mW from a 3.3-V analog supply, making it ideal for portable battery-powered audio and telephony applications.

The high-power output drivers are capable of driving a variety of load configurations, including up to three channels of single-ended 16-Ω headphones using ac-coupling capacitors, or stereo 16-Ω headphones in a capacitorless output configuration. The mono class-D output is capable of differentially driving an 8-Ω speaker.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo audio ADC supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers or AGC that can provide up to 59.5 dB analog gain for low-level microphone inputs. The TLV320AIC3107 provides an extremely high range of programmability for both attack (8-1,408 ms) and for decay (0.05-22.4 seconds). This extended AGC range allows the AGC to be tuned for many types of applications.

For battery saving applications where neither analog nor digital signal processing are required, the device can be put in a special analog signal passthru mode. This mode significantly reduces power consumption, as most of the device is powered down during this pass through operation.

The serial control bus supports I2C protocol, while the serial audio data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC3107 operates from an analog supply of 2.7 V–3.6 V, a digital core supply of 1.65 V–1.95 V, a digital I/O supply of 1.1 V–3.6 V, and a speaker amplifier supply of 2.7V–5.5V. The device is available in the 5 × 5-mm, 40-pin QFN package and in the future a 3.5 × 3-mm, 42-lead DSBGA package.

The record path of the TLV320AIC3107 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. Programmable filters are available during record which can remove audible noise that can occur during optical zooming in digital cameras. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls, to the various outputs.

The TLV320AIC3107 contains three high-power output drivers as well as two single-ended line output drivers, and a differential class-D output driver.

The TLV320AIC3107 is a low power stereo audio codec with stereo headphone amplifier, and mono class-D speaker driver, as well as multiple inputs and outputs programmable in single-ended or fully differential configurations.

Extensive register-based power control is included, enabling stereo 48-kHz DAC playback as low as 15 mW from a 3.3-V analog supply, making it ideal for portable battery-powered audio and telephony applications.

The high-power output drivers are capable of driving a variety of load configurations, including up to three channels of single-ended 16-Ω headphones using ac-coupling capacitors, or stereo 16-Ω headphones in a capacitorless output configuration. The mono class-D output is capable of differentially driving an 8-Ω speaker.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo audio ADC supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers or AGC that can provide up to 59.5 dB analog gain for low-level microphone inputs. The TLV320AIC3107 provides an extremely high range of programmability for both attack (8-1,408 ms) and for decay (0.05-22.4 seconds). This extended AGC range allows the AGC to be tuned for many types of applications.

For battery saving applications where neither analog nor digital signal processing are required, the device can be put in a special analog signal passthru mode. This mode significantly reduces power consumption, as most of the device is powered down during this pass through operation.

The serial control bus supports I2C protocol, while the serial audio data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC3107 operates from an analog supply of 2.7 V–3.6 V, a digital core supply of 1.65 V–1.95 V, a digital I/O supply of 1.1 V–3.6 V, and a speaker amplifier supply of 2.7V–5.5V. The device is available in the 5 × 5-mm, 40-pin QFN package and in the future a 3.5 × 3-mm, 42-lead DSBGA package.

The record path of the TLV320AIC3107 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. Programmable filters are available during record which can remove audible noise that can occur during optical zooming in digital cameras. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls, to the various outputs.

The TLV320AIC3107 contains three high-power output drivers as well as two single-ended line output drivers, and a differential class-D output driver.

下載 觀看帶字幕的視頻 視頻

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 13
類型 標題 下載最新的英語版本 日期
* 數據表 TLV320AIC3107 Low-Power Stereo Codec With Integrated Mono Class-D Speaker Amplifier 數據表 (Rev. D) PDF | HTML 2014年 12月 30日
用戶指南 TLV320AIC310xEVM 控制軟件快速入門指南 (Rev. A) PDF | HTML 英語版 (Rev.A) PDF | HTML 2022年 7月 1日
應用手冊 Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 2019年 12月 31日
應用手冊 Audio Serial Interface Configurations for Audio Codecs (Rev. A) 2019年 6月 27日
應用手冊 Common Noise Issues in Audio Codecs 2017年 7月 21日
應用手冊 Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) 2013年 10月 28日
應用手冊 Dual-SPI Emulating I2S on Tiva? C Series TM4C123x MCUs (Rev. B) 2013年 6月 12日
應用手冊 雙SPI 仿真I2S,此仿真在Stellaris? LM4F MCU 上實現 (Rev. A) 最新英語版本 (Rev.B) 2013年 2月 27日
應用手冊 Audio Serial Interface Configurations for Audio Codecs 2010年 9月 22日
應用手冊 Interfacing an I2S Device to an MSP430 Device (Rev. A) 2010年 3月 22日
應用手冊 Solving Enumeration Errors in USB Audio DAC and CODEC Designs 2009年 10月 30日
應用手冊 Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 2009年 7月 8日
EVM 用戶指南 TLV320AIC3107EVM-K - User Guide 2008年 11月 20日

設計和開發

如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。

評估板

TLV320AIC3107EVM-K — TLV320AIC3107 評估模塊和 USB 主板

TLV320AIC3107EVM-K 包含兩塊電路板:TLV320AIC3107EVM 及 USB-MODEVM,可與個人電腦配合使用。TLV320AIC3107EVM 是用德州儀器 (TI) 模塊化 EVM 封裝制造的 EVM。此評估模塊 (EVM) 是一款完整的立體聲音頻編解碼器,具有多個輸入和輸出、廣泛的音頻路由、混合和音效功能。模塊化外形支持直接評估 TLV320AIC3107 器件,而該器件是一款具有集成式單聲道 D 類放大器的低功耗立體聲音頻編解碼器。該模塊化 EVM 還兼容德州儀器 (TI) 的 56KINTERFACE 和 HPA-MCUINTERFACE 板,以及支持 TI (...)

用戶指南: PDF
TI.com 上無現貨
驅動程序或庫

TLV320AIC31XX-DRIVERS — TLV320AIC31xx CODEC 系列 Linux 驅動程序支持

這些 Linux 驅動程序支持用于 TLV320AIC31xx 器件系列的低功耗音頻編解碼器,并且包括 .c 和 .h 文件。點擊下方的“Go to third party”按鈕將轉到 git.kernal.org,您可從中下載相應的驅動程序。

Linux 主線狀態
Linux 主線中提供:是
可通過 git.ti.com 獲取:不適用

Linux 器件樹文檔

修復程序和代碼增強

如果有需要添加到此驅動程序的修復程序和/或代碼增強,請執行以下任一操作:

1.將補丁發送到維護人員文件中列出的相關 (...)

計算工具

COEFFICIENT-CALC Coefficient Calculator For Digital Biquad Filters

COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

支持的產品和硬件

支持的產品和硬件

產品
音頻編解碼器
TLV320AIC26 具有耳機/揚聲器放大器和 12 位測量 ADC 的低功耗單聲道 ADC/立體聲 DAC TLV320AIC28 具有 6 個音頻輸入和耳機/揚聲器放大器的低功耗單聲道 ADC/立體聲 DAC TLV320AIC29 具有 6 個音頻輸入和耳機/揚聲器放大器的低功耗單聲道 ADC/立體聲 DAC TLV320AIC3007 具有集成 D 級放大器的低功耗立體聲編解碼器 TLV320AIC31 具有 6 輸入、6 輸出集成耳機/揚聲器放大器以及 3D 效果的低功耗立體聲編解碼器 TLV320AIC3100 具有音頻處理和單聲道 D 級放大器的低功耗音頻編解碼器 TLV320AIC3101 具有 6 個輸入、6 個輸出、揚聲器/耳機放大器和增強數字效果的低功率立體聲編解碼器 TLV320AIC3104 具有 6 個輸入、6 個輸出、HP 放大器和增強數字效果的低功率立體聲編解碼器 TLV320AIC3105 具有 6 個輸入、6 個輸出、HP 放大器和增強數字效果的低功率立體聲編解碼器 TLV320AIC3106 具有 10 個輸入、7 個輸出、耳機放大器和增強數字效果的低功耗立體聲編解碼器 TLV320AIC3107 具有集成單聲道 D 級放大器的低功耗立體聲編解碼器 TLV320AIC3110 具有 1.3W 立體聲 D 級揚聲器放大器的低功耗音頻編解碼器 TLV320AIC3111 具有嵌入式 miniDSP 和立體聲 D 級揚聲器放大器的低功耗音頻編解碼器 TLV320AIC3120 具有 miniDSP 和 2.5W 單聲道 D 級揚聲器放大器的低功耗音頻編解碼器 TLV320AIC32 具有 6 輸入、6 輸出、耳機/揚聲器放大器和 3D 效果的低功耗立體聲編解碼器 TLV320AIC3204 采用 PowerTune? 技術的極低功耗立體聲音頻編解碼器 TLV320AIC3206 具有 DirectPath? 耳機放大器的超低功耗立體聲編解碼器 TLV320AIC3254 具有可編程 miniDSP 的極低功耗立體聲音頻編解碼器 TLV320AIC3256 具有 miniDSP 和 DirectPath? 耳機放大器的超低功耗立體聲編解碼器 TLV320AIC33 具有 10 個輸入、7 個輸出、耳機/揚聲器放大器和增強數字效果的低功耗立體聲編解碼器 TLV320AIC34 低功耗 4 通道編解碼器
音頻 ADC
TLV320ADC3001 92dB SNR 低功耗立體聲 ADC (ADC3001) TLV320ADC3101 支持數字麥克風且具有 miniDSP 的 92dB SNR 低功耗立體聲 ADC TSC2100 具有立體聲 DAC/帶耳機/揚聲器放大器的單聲道 ADC 的 4 線觸摸屏控制器 TSC2101 具有立體聲 DAC/帶耳機/揚聲器放大器的單聲道 ADC 的 4 線觸摸屏控制器 TSC2102 具有帶耳機放大器的立體聲 DAC 的 4 線觸摸屏控制器 TSC2117 具有低功耗單聲道 ADC/立體聲 DAC 的 4 線觸摸屏控制器 TSC2301 具有耳機放大器的立體聲編解碼器的 4 線觸摸屏控制器(鍵盤接口 + 6 個 GPIO)
General-purpose audio amplifiers
LM48901 2.8W 立體聲數字輸入 AB 類音頻放大器 LM48903 具有可選 SMD 封裝的 2.8W 立體聲數字輸入 AB 類音頻放大器 TAS2505 具有音頻處理和單聲道耳機放大器的 2W 單聲道、數字和模擬輸入 D 類音頻放大器 TAS2521 具有 miniDSP 和 18mW 單聲道耳機驅動器的 2W 單聲道、數字和模擬輸入 D 類音頻放大器 TPA6201A1 1W 單聲道全差動 AB 類音頻放大器
Automotive audio amplifiers
TAS2505-Q1 具有音頻處理功能的汽車類 2W 單聲道數字或模擬輸入 D 類放大器
Speaker, TV & soundbar audio amplifiers
TAS5713PHP TAS5713PHP
計算工具

SLAR163 Audio CODEC/ADC PLL Calculator

支持的產品和硬件

支持的產品和硬件

產品
音頻編解碼器
TLV320AIC3007 具有集成 D 級放大器的低功耗立體聲編解碼器 TLV320AIC3100 具有音頻處理和單聲道 D 級放大器的低功耗音頻編解碼器 TLV320AIC3101 具有 6 個輸入、6 個輸出、揚聲器/耳機放大器和增強數字效果的低功率立體聲編解碼器 TLV320AIC3104 具有 6 個輸入、6 個輸出、HP 放大器和增強數字效果的低功率立體聲編解碼器 TLV320AIC3104-Q1 具有 6 個音頻輸入引腳和 6 個音頻輸出驅動器的汽車類低功耗立體聲音頻編解碼器 TLV320AIC3105 具有 6 個輸入、6 個輸出、HP 放大器和增強數字效果的低功率立體聲編解碼器 TLV320AIC3106 具有 10 個輸入、7 個輸出、耳機放大器和增強數字效果的低功耗立體聲編解碼器 TLV320AIC3106-Q1 具有耳機放大器和增強數字效果的汽車類低功耗立體聲編解碼器 TLV320AIC3107 具有集成單聲道 D 級放大器的低功耗立體聲編解碼器 TLV320AIC3109-Q1 汽車類低功耗 96kHz 單聲道音頻編解碼器 TLV320AIC3110 具有 1.3W 立體聲 D 級揚聲器放大器的低功耗音頻編解碼器 TLV320AIC3111 具有嵌入式 miniDSP 和立體聲 D 級揚聲器放大器的低功耗音頻編解碼器 TLV320AIC3120 具有 miniDSP 和 2.5W 單聲道 D 級揚聲器放大器的低功耗音頻編解碼器 TLV320AIC3204 采用 PowerTune? 技術的極低功耗立體聲音頻編解碼器 TLV320AIC3206 具有 DirectPath? 耳機放大器的超低功耗立體聲編解碼器 TLV320AIC3253 具有 miniDSP 和立體聲數字麥克風輸入的超低功耗立體聲音頻編解碼器 TLV320AIC3254 具有可編程 miniDSP 的極低功耗立體聲音頻編解碼器 TLV320AIC3254-Q1 采用 miniDSP 和 PowerTune? 技術的汽車類超低功耗立體聲音頻編解碼器 TLV320AIC3256 具有 miniDSP 和 DirectPath? 耳機放大器的超低功耗立體聲編解碼器 TLV320AIC34 低功耗 4 通道編解碼器
音頻 ADC
TLV320ADC3001 92dB SNR 低功耗立體聲 ADC (ADC3001) TLV320ADC3100 適用于聲控系統和便攜式音頻的低功耗立體聲模數轉換器 (ADC) TLV320ADC3101 支持數字麥克風且具有 miniDSP 的 92dB SNR 低功耗立體聲 ADC
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用,包括業內超大的模型庫之一,涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
封裝 引腳 CAD 符號、封裝和 3D 模型
DSBGA (YZF) 42 Ultra Librarian
WQFN (RSB) 40 Ultra Librarian

訂購和質量

包含信息:
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息:
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻