可提供此產品的更新版本

功能與比較器件相似
TAC5142 正在供貨 具有 103dB 動態范圍 ADC 和 110dB 動態范圍 DAC 的硬件控制立體聲音頻編解碼器 PCM code with >10dB higher SNR for both ADC and DAC

產品詳情

Number of ADC channels 4 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R Control interface I2C Analog inputs 6 Analog outputs 6 Features Matrix mixing, Phase-locked loop (PLL), Stereo headphone amplifier, Stereo speaker amplifier Sampling rate (max) (kHz) 96 Rating Catalog ADC SNR (typ) (dB) 90 DAC SNR (typ) (dB) 100 Operating temperature range (°C) -40 to 85
Number of ADC channels 4 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R Control interface I2C Analog inputs 6 Analog outputs 6 Features Matrix mixing, Phase-locked loop (PLL), Stereo headphone amplifier, Stereo speaker amplifier Sampling rate (max) (kHz) 96 Rating Catalog ADC SNR (typ) (dB) 90 DAC SNR (typ) (dB) 100 Operating temperature range (°C) -40 to 85
VQFN (RHB) 32 25 mm2 5 x 5
  • Stereo Audio DAC:
    • 100-dB (A-Weighted) Signal-to-Noise Ratio
    • 16-/20-/24-/32-Bit Data
    • Supports Rates From 8 kHz to 96 kHz
    • 3D/Bass/Treble/EQ/De-Emphasis Effects
  • Stereo Audio ADC:
    • 92-dB (A-Weighted) Signal-to-Noise Ratio
    • Supports Rates From 8 kHz to 96 kHz
  • Six Audio Input Pins:
    • Two Stereo Differential/Single-Ended Inputs
  • Six Audio Output Drivers:
    • Stereo 8-, 500-mW/Channel Speaker Drive Capability
    • Stereo Fully-Differential or Single-Ended Headphone Drivers
    • Fully Differential Stereo Line Outputs
  • Low Power: 14-mW Stereo, 48-kHz Playback With 3.3-V Analog Supply
  • Programmable Input/Output Analog Gains
  • Automatic Gain Control (AGC) for Recording
  • Programmable Microphone Bias Level
  • Programmable PLL for Flexible Clock Generation
  • I2C? Control Bus
  • Audio Serial Data Bus Supports I2S?, Left-/Right-Justified, DSP, and TDM Modes
  • Extensive Modular Power Control
  • Power Supplies:
    • Analog: 2.7 V to 3.6 V
    • Digital Core: 1.65 V to 1.95 V
    • Digital I/O: 1.1 V to 3.6 V
  • Available Packages: 5-mm × 5-mm, 32-Pin QFN

I2C, I2S are trademarks of NXP Semiconductors.
All other trademarks are the property of their respective owners.

  • Stereo Audio DAC:
    • 100-dB (A-Weighted) Signal-to-Noise Ratio
    • 16-/20-/24-/32-Bit Data
    • Supports Rates From 8 kHz to 96 kHz
    • 3D/Bass/Treble/EQ/De-Emphasis Effects
  • Stereo Audio ADC:
    • 92-dB (A-Weighted) Signal-to-Noise Ratio
    • Supports Rates From 8 kHz to 96 kHz
  • Six Audio Input Pins:
    • Two Stereo Differential/Single-Ended Inputs
  • Six Audio Output Drivers:
    • Stereo 8-, 500-mW/Channel Speaker Drive Capability
    • Stereo Fully-Differential or Single-Ended Headphone Drivers
    • Fully Differential Stereo Line Outputs
  • Low Power: 14-mW Stereo, 48-kHz Playback With 3.3-V Analog Supply
  • Programmable Input/Output Analog Gains
  • Automatic Gain Control (AGC) for Recording
  • Programmable Microphone Bias Level
  • Programmable PLL for Flexible Clock Generation
  • I2C? Control Bus
  • Audio Serial Data Bus Supports I2S?, Left-/Right-Justified, DSP, and TDM Modes
  • Extensive Modular Power Control
  • Power Supplies:
    • Analog: 2.7 V to 3.6 V
    • Digital Core: 1.65 V to 1.95 V
    • Digital I/O: 1.1 V to 3.6 V
  • Available Packages: 5-mm × 5-mm, 32-Pin QFN

I2C, I2S are trademarks of NXP Semiconductors.
All other trademarks are the property of their respective owners.

The TLV320AIC31 is a low-power stereo audio codec with a stereo headphone amplifier, as well as multiple inputs and outputs, programmable in single-ended or fully-differential configurations. Extensive register-based power control is included, enabling stereo 48-kHz digital-to-analog converter (DAC) playback as low as 14 mW from a 3.3-V analog supply, making it ideal for portable, battery-powered audio and telephony applications.

The record path of the TLV320AIC31 contains integrated microphone bias, a digitally-controlled stereo microphone pre-amp, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls to the various outputs.

The TLV320AIC31 contains four high-power output drivers as well as two fully differential output drivers. The high-power output drivers are capable of driving a variety of load configurations, including up to four channels of single-ended, 16- speakers in a BTL configuration at 500 mW per channel.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass/treble/midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo-audio analog-to-digital converter (ADC) supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers providing up to +59.5 dB analog gain for low-level microphone inputs.

The serial control bus supports the I2C protocol, while the serial-audio data bus is programmable for I2S, left-/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC31 operates from an analog supply of 2.7 V to 3.6 V, a digital core supply of 1.65 V to 1.95 V, and a digital I/O supply of 1.1 V to 3.6 V. The device is available in a 5 × 5 mm, 32-lead QFN package.

The TLV320AIC31 is a low-power stereo audio codec with a stereo headphone amplifier, as well as multiple inputs and outputs, programmable in single-ended or fully-differential configurations. Extensive register-based power control is included, enabling stereo 48-kHz digital-to-analog converter (DAC) playback as low as 14 mW from a 3.3-V analog supply, making it ideal for portable, battery-powered audio and telephony applications.

The record path of the TLV320AIC31 contains integrated microphone bias, a digitally-controlled stereo microphone pre-amp, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls to the various outputs.

The TLV320AIC31 contains four high-power output drivers as well as two fully differential output drivers. The high-power output drivers are capable of driving a variety of load configurations, including up to four channels of single-ended, 16- speakers in a BTL configuration at 500 mW per channel.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass/treble/midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo-audio analog-to-digital converter (ADC) supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers providing up to +59.5 dB analog gain for low-level microphone inputs.

The serial control bus supports the I2C protocol, while the serial-audio data bus is programmable for I2S, left-/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC31 operates from an analog supply of 2.7 V to 3.6 V, a digital core supply of 1.65 V to 1.95 V, and a digital I/O supply of 1.1 V to 3.6 V. The device is available in a 5 × 5 mm, 32-lead QFN package.

下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

功能與比較器件相似
TLV320AIC3101 正在供貨 具有 6 個輸入、6 個輸出、揚聲器/耳機放大器和增強數字效果的低功率立體聲編解碼器 Pin-to-pin and software compatible, includes additional fiters in the ADC path.
TLV320AIC3104 正在供貨 具有 6 個輸入、6 個輸出、HP 放大器和增強數字效果的低功率立體聲編解碼器 Pin-to-pin and software compatible, includes additional fiters in the ADC path, without speaker amplifier

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 9
類型 標題 下載最新的英語版本 日期
* 數據表 Low Power Stereo Audio Codec for Portable Audio/Telephony 數據表 (Rev. C) 2008年 11月 12日
應用手冊 Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 2019年 12月 31日
應用手冊 Audio Serial Interface Configurations for Audio Codecs (Rev. A) 2019年 6月 27日
應用手冊 Audio Serial Interface Configurations for Audio Codecs 2010年 9月 22日
應用手冊 Interfacing an I2S Device to an MSP430 Device (Rev. A) 2010年 3月 22日
應用手冊 Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 2009年 7月 8日
應用手冊 Using TLV320AIC3x Digital Audio Data Serial Interface w/TDM Support 2006年 7月 5日
EVM 用戶指南 TLV320AIC31EVM - User Guide 2005年 11月 18日
應用手冊 TLV320AIC3x WinCE 5.0 Drivers 2005年 9月 27日

設計和開發

如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。

驅動程序或庫

TLV320AIC3XSW-LINUX — 適用于 TLV320AIC3X 的 Linux 驅動程序

Linux 驅動程序支持用于 TLV320AIC3x 系列的低功耗立體聲編解碼器,通過 I2C 總線和接口與 Linux 便攜式設備動態音頻電源管理 (DAPM) 系統進行通信。
Linux 主線狀態

Linux 主線中提供:是
可通過 git.ti.com 獲取:不適用

Linux 源文件

與該器件關聯的文件為:

  1. sound/soc/codecs/tlv320aic3x.c
  2. Documentation/devicetree/bindings/sound/tlv320aic3x.txt
  3. sound/soc/codecs/tlv320aic3x.h
  4. include/sound/tlv320aic3x.h
源文件 (...)
仿真模型

TLV320AIC31 IBIS Model

SLAM113.ZIP (86 KB) - IBIS Model
計算工具

COEFFICIENT-CALC Coefficient Calculator For Digital Biquad Filters

COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

支持的產品和硬件

支持的產品和硬件

產品
音頻編解碼器
TLV320AIC26 具有耳機/揚聲器放大器和 12 位測量 ADC 的低功耗單聲道 ADC/立體聲 DAC TLV320AIC28 具有 6 個音頻輸入和耳機/揚聲器放大器的低功耗單聲道 ADC/立體聲 DAC TLV320AIC29 具有 6 個音頻輸入和耳機/揚聲器放大器的低功耗單聲道 ADC/立體聲 DAC TLV320AIC3007 具有集成 D 級放大器的低功耗立體聲編解碼器 TLV320AIC31 具有 6 輸入、6 輸出集成耳機/揚聲器放大器以及 3D 效果的低功耗立體聲編解碼器 TLV320AIC3100 具有音頻處理和單聲道 D 級放大器的低功耗音頻編解碼器 TLV320AIC3101 具有 6 個輸入、6 個輸出、揚聲器/耳機放大器和增強數字效果的低功率立體聲編解碼器 TLV320AIC3104 具有 6 個輸入、6 個輸出、HP 放大器和增強數字效果的低功率立體聲編解碼器 TLV320AIC3105 具有 6 個輸入、6 個輸出、HP 放大器和增強數字效果的低功率立體聲編解碼器 TLV320AIC3106 具有 10 個輸入、7 個輸出、耳機放大器和增強數字效果的低功耗立體聲編解碼器 TLV320AIC3107 具有集成單聲道 D 級放大器的低功耗立體聲編解碼器 TLV320AIC3110 具有 1.3W 立體聲 D 級揚聲器放大器的低功耗音頻編解碼器 TLV320AIC3111 具有嵌入式 miniDSP 和立體聲 D 級揚聲器放大器的低功耗音頻編解碼器 TLV320AIC3120 具有 miniDSP 和 2.5W 單聲道 D 級揚聲器放大器的低功耗音頻編解碼器 TLV320AIC32 具有 6 輸入、6 輸出、耳機/揚聲器放大器和 3D 效果的低功耗立體聲編解碼器 TLV320AIC3204 采用 PowerTune? 技術的極低功耗立體聲音頻編解碼器 TLV320AIC3206 具有 DirectPath? 耳機放大器的超低功耗立體聲編解碼器 TLV320AIC3254 具有可編程 miniDSP 的極低功耗立體聲音頻編解碼器 TLV320AIC3256 具有 miniDSP 和 DirectPath? 耳機放大器的超低功耗立體聲編解碼器 TLV320AIC33 具有 10 個輸入、7 個輸出、耳機/揚聲器放大器和增強數字效果的低功耗立體聲編解碼器 TLV320AIC34 低功耗 4 通道編解碼器
音頻 ADC
TLV320ADC3001 92dB SNR 低功耗立體聲 ADC (ADC3001) TLV320ADC3101 支持數字麥克風且具有 miniDSP 的 92dB SNR 低功耗立體聲 ADC TSC2100 具有立體聲 DAC/帶耳機/揚聲器放大器的單聲道 ADC 的 4 線觸摸屏控制器 TSC2101 具有立體聲 DAC/帶耳機/揚聲器放大器的單聲道 ADC 的 4 線觸摸屏控制器 TSC2102 具有帶耳機放大器的立體聲 DAC 的 4 線觸摸屏控制器 TSC2117 具有低功耗單聲道 ADC/立體聲 DAC 的 4 線觸摸屏控制器 TSC2301 具有耳機放大器的立體聲編解碼器的 4 線觸摸屏控制器(鍵盤接口 + 6 個 GPIO)
General-purpose audio amplifiers
LM48901 2.8W 立體聲數字輸入 AB 類音頻放大器 LM48903 具有可選 SMD 封裝的 2.8W 立體聲數字輸入 AB 類音頻放大器 TAS2505 具有音頻處理和單聲道耳機放大器的 2W 單聲道、數字和模擬輸入 D 類音頻放大器 TAS2521 具有 miniDSP 和 18mW 單聲道耳機驅動器的 2W 單聲道、數字和模擬輸入 D 類音頻放大器 TPA6201A1 1W 單聲道全差動 AB 類音頻放大器
Automotive audio amplifiers
TAS2505-Q1 具有音頻處理功能的汽車類 2W 單聲道數字或模擬輸入 D 類放大器
Speaker, TV & soundbar audio amplifiers
TAS5713PHP TAS5713PHP
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用,包括業內超大的模型庫之一,涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
封裝 引腳 CAD 符號、封裝和 3D 模型
VQFN (RHB) 32 Ultra Librarian

訂購和質量

包含信息:
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息:
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻