SLVUAW9C September 2016 – February 2020 UCD90320
When “De-assert When Power-Good” is selected, the reset pin is de-asserted after the GPI pins identified by these bits reach the asserted state and then the Delay Time passes. (See Section 10.39)
When “Assert When NOT Power-Good” is selected, the reset pin is immediately asserted whenever the any of the GPI pins identified by these bits leaves the asserted state.
| Bit | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 |
|---|---|---|---|---|---|---|---|---|
| Purpose | GPI Z | GPI Y | GPI X | GPI W | GPI 27 | GPI 26 | GPI 25 | GPI 24 |
| Bit | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|---|---|---|---|---|---|---|---|---|
| Purpose | GPI 23 | GPI 22 | GPI 21 | GPI 20 | GPI 19 | GPI 18 | GPI 17 | GPI 16 |
| Bit | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
|---|---|---|---|---|---|---|---|---|
| Purpose | GPI 15 | GPI 14 | GPI 13 | GPI 12 | GPI 11 | GPI 10 | GPI 9 | GPI 8 |
| Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|---|---|---|---|---|---|---|---|---|
| Purpose | GPI Z | GPI Y | GPI X | GPI W | GPI V | GPI U | GPI T | GPI S |