SLUSFU6 September 2025 UCC27834-Q1
PRODMIX
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| SUPPLY BLOCK | ||||||
| VVDD ON | Turn-on threshold voltage of VDD | 6.9 | 7.5 | 8.1 | V | |
| VVDD OFF | Turn-off threshold voltage of VDD | 6.4 | 7.0 | 7.6 | ||
| VVDD HYS | Hysteresis of VDD | 0.5 | ||||
| VVHB ON | Turn-on threshold voltage of VHB-VHS | 6.2 | 6.8 | 7.4 | ||
| VVHB OFF | Turn-off threshold voltage of VHB-VHS | 5.7 | 6.3 | 6.9 | ||
| VVHB HYS | Hysteresis of VHB-VHS | 0.5 | ||||
| IVDDO | VDD operating current | HI=LI=0 to 5 V, f=500kHz, CLOAD = 0 | 1100 | 2000 | μA | |
| IQVSS | Quiescent VDD-VSS supply current | HI=LI=0 V or 5 V, DC on/off state | 150 | 300 | μA | |
| IQBSO | HB-HS operating supply current | HI=LI=0 to 5 V, f=500kHz, CLOAD = 0 | 1000 | 1300 | μA | |
| IQBS | Quiescent HB-HS supply current | HI=0 V or 5 V, HO in DC on/off state | 90 | 180 | μA | |
| IBL | Bootstrap supply leakage current (HB to VSS) | HB=HS=230 V, VDD=VSS=0 V | 0.1 | 20 | μA | |
| INPUT AND ENABLE BLOCK | ||||||
| VINH | Input Pin (HI, LI,) high threshold | 1.7 | 2.1 | 2.5 | V | |
| VINL | Input Pin (HI, LI,) low threshold | 0.7 | 1.0 | 1.3 | V | |
| VINHYS | Input Pin (HI, LI,) threshold hysteresis | 1.1 | V | |||
| IINL | HI, LI input low bias current | HI, LI=0 V | -5 | 5 | μA | |
| IINH | HI, LI input high bias current | HI, LI=5 V | 20 | 55 | μA | |
| RHI | Pull down resistor on HI input pin | HI, LI=5 V | 100 | 200 | K? | |
| RLI | Pull down resistor on LI input pin | HI, LI=5 V | 100 | 200 | K? | |
| OUTPUT BLOCK | ||||||
| VDD-VLOH | LO output high voltage | LI = 5V, ILO=-20mA | 250 | 500 | mV | |
| VHB-VHOH | HO output high voltage | HI = 5V, IHO=-20mA | 250 | 500 | mV | |
| VLOL | LO output low voltage | LI = 0V, ILO=20mA | 20 | 40 | mV | |
| VHOL | HO output low voltage | HI = 0V, IHO=20mA | 20 | 40 | mV | |
| RLOL, RHOL | LO, HO output pull-down resistance | ILO=IHO=20mA | 1 | 2 | Ω | |
| RLOH, RHOH | LO, HO output pull-up resistance | ILO=IHO=-20mA | 12.6 | 25 | ||
| IGPK-(1) | HO, LO output sink current | HI=LI=0V, HO=LO=15V, PW<10us | 4 | A | ||
| IGPK+(1) | HO, LO output source current | HI=LI=5V, HO=LO=0V, PW<10us | 3.5 | |||