ZHCSG04F january 2017 – may 2023 TPS65235-1
PRODUCTION DATA
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Reserved | 0 | LDO_ON | T125 | TSD | OCP | CABLE_GOOD | VOUT_GOOD |
| R-0b | R-0b | R-0b | R-0b | R-1b | R-0b | R-0b | R-1b |
| Bit | Field | Type | Reset | Description |
|---|---|---|---|---|
| 7 | Reserved | R | 0b | Reserved |
| 6 | TDETGOOD | R | 0b | 0b = 22-kHz tone detected on DIN pin is out of range 1b = 22-kHz tone detected on DIN pin is in range |
| 5 | LDO_ON | R | 1b | 0b = Internal LDO is turned off but boost converter is on 1b = Internal LDO is turned on and boost converter is on |
| 4 | T125 | R | 0b | 0b = Die temperature < 125°C 1b = Die temperature > 125°C |
| 3 | TSD | R | 1b | 0b = No thermal shutdown triggered 1b = Thermal shutdown triggered. The FAULT pin logic is latched to low, processor must read this register to release the fault conditions |
| 2 | OCP | R | 0b | 0b = Overcurrent protection conditions released 1b = Overcurrent protection triggered. The FAULT pin logic is latched to low, processor must read this register to release the fault conditions |
| 1 | CABLE_GOOD | R | 0b | 0b = Cable not connected 1b = Cable connection good |
| 0 | VOUT_GOOD | R | 1b | 0b = LNB output voltage out of range 1b = LNB output voltage in range |