ZHCSJN5A February 2018 – April 2019 TPS2HB50-Q1
ADVANCE INFORMATION for pre-production products; subject to change without notice.
| PIN | I/O | DESCRIPTION | |
|---|---|---|---|
| NO. | NAME | ||
| 1 | GND | — | Device ground |
| 2 | SNS | O | Sense output |
| 3 | LATCH | I | Sets fault handling behavior (latched or auto-retry) |
| 4 | EN1 | I | Channel 1 control input, active high |
| 5 | ILIM1 | O | Connect pull-up resistor to VBB to set current-limit threshold on CH1 |
| 6-8 | VOUT1 | O | Channel 1 output |
| 9-11 | VOUT2 | O | Channel 2 output |
| 12 | ILIM2 | O | Connect pull-up resistor to VBB to set current-limit threshold on CH2 |
| 13 | EN2 | I | Channel 2 control input, active high |
| 14 | SEL1 | I | Diagnostics select 1 |
| 15 | SEL2 | I | Diagnostics select 2 |
| 16 | DIA_EN | I | Diagnostic enable, active high |
| Exposed pad | VBB | I | Power supply input |