91视频久久久久,九色视频免费自拍网站,欧美日韩中文国产在线

ZHCSG96A May 2017 – May 2019 TMP116

PRODUCTION DATA.

封裝選項

機械數據 (封裝 | 引腳)

DRV|6
- MPDS216E

散熱焊盤機械數據 (封裝 | 引腳)

DRV|6
- QFND087M

訂購信息

6.5 Electrical Characteristics

minimum and maximum specifications are over –55°C to +125°C and V+ = 1.9 V to 5.5 V (unless otherwise noted); typical specifications are at T_A = 25°C and V+ = 3.3 V

PARAMETER			TEST CONDITIONS	MIN	TYP	MAX	UNIT
TEMPERATURE-TO-DIGITAL CONVERTER
	Temperature accuracy⁽¹⁾	TMP116	–10°C to +85°C, V+ = 3.3 V	–0.2	±0.1	0.2	°C
			–40°C to +105°C, V+ = 3.0 V to 3.6 V	–0.25	±0.2	0.25
			+105°C to +125°C, V+ = 3.0 V to 3.6 V	–0.3	±0.25	0.3
			–40°C to +125°C, V+ = 1.9 V to 5.5 V⁽⁶⁾	–0.4	±0.3	0.4
		TMP116N	–25°C to +85°C, V+ = 3.3 V	–0.3	±0.2	0.3
			–40°C to +125°C, V+ = 3.0 V to 3.6 V	–0.4	±0.3	0.4
			–40°C to +125°C V+ = 1.9 V to 5.5 V⁽⁶⁾	–0.5	±0.4	0.5
	DC power-supply sensitivity		One-shot mode, 8 averages, T_A = 25°C	0	20	55	m°C/V
	Temperature resolution (LSB)				7.8125		m°C
	Repeatability⁽²⁾		V+ = 3.3 V, 8 averages, 1-Hz sampling		±1		LSB
	Long-term stability and drift		300 hours at 150°C⁽³⁾		±0.02		°C
	Temperature cycling and hysteresis⁽¹⁾⁽⁴⁾				±1		LSB
DIGITAL INPUT/OUTPUT
	Input capacitance				3		pF
V_IH	Input logic high level			0.7 (V+)			V
V_IL	Input logic low level					0.3 (V+)	V
I_IN	Input current			–0.2		0.2	µA
V_OLS	SDA output logic low level		I_OL = –3 mA	0		0.4	V
V_OLA	ALERT output logic low level		I_OL = –3 mA	0		0.4	V
POWER SUPPLY
I_Q	Quiescent current		Active conversion, serial bus inactive		135	220	µA
			1-Hz conversion cycle, averaging mode off, serial bus inactive, 25°C		3.5	4.5
			1-Hz conversion cycle, 8 averages mode, serial bus inactive, 25°C		16	22
			1-Hz conversion cycle, averaging mode off, serial bus active, SCL frequency = 400 kHz		21
I_SB	Standby current⁽⁵⁾		Serial bus inactive, SCL and SDA = V+, 25°C		1.25	2.1	µA
I_SD	Shutdown current		Serial bus inactive, SCL and SDA = V+, 25°C		0.25	0.5	µA
			Serial bus inactive, SCL and SDA = V+, 125°C			8.5
			Serial bus active, SCL frequency = 400 kHz		17
I_EE	EEPROM write quiescent current		ADC conversion off; serial bus inactive		240		µA
V_POR	Power-on-reset threshold voltage		V+ rising		1.6		V
	Brownout detect		V+ falling		1.1		V
	Reset time		Time required by device to reset		1.5		ms
	Active conversion time		1 conversion	13.5	15.5	17	ms
EEPROM
	Programming time				7		ms
	Number of writes			1,000	50,000		Times
	Data retention time			10	100		Years

(1) 8 averages, 1-Hz conversion cycle. Measurements are taken in oil bath.

(2) Repeatability is the ability to reproduce a reading when the measured temperature is applied consecutively, under the same conditions.

(3) Long-term stability is determined using accelerated operational life testing at a junction temperature of 150°C.

(4) Hysteresis is defined as the ability to reproduce a temperature reading as the temperature varies from room → hot → room → cold → room. The temperatures used for this test are –40°C, 25°C, and 125°C.

(5) Quiescent current between conversions.

(6) ±0.75°C maximum error between –55°C to –40°C.