ZHCSMJ5F june 2010 – december 2020 TLV809
PRODUCTION DATA
9.1.1 VDD Transient Rejection
The device has built-in rejection of fast transients on the VDD pin. The rejection of transients depends on both the duration and the amplitude of the transient. The amplitude of the transient is measured from the bottom of the transient to the negative threshold voltage of the device, as shown in Figure 9-1.
Figure 9-1 Voltage
Transient MeasurementThe device does not respond to transients that are fast duration and low amplitude or long duration and small amplitude. Transients meeting or longer than the tw specified in the Section 7.6 section triggers a reset.