ZHCSQV1C March 2020 – December 2022 TCAN1463-Q1
PRODUCTION DATA
- 1 特性
- 2 應用
- 3 說明
- 4 Revision History
- 5 說明（續）
- 6 Pin Configuration and Functions
-
7 Specifications
- 7.1 Absolute Maximum Ratings
- 7.2 ESD Ratings
- 7.3 ESD Ratings - IEC Specifications
- 7.4 Recommended Operating Conditions
- 7.5 Thermal Information
- 7.6 Power Dissipation Ratings
- 7.7 Power Supply Characteristics
- 7.8 Electrical Characteristics
- 7.9 Timing Requirements
- 7.10 Switching Characteristics
- 7.11 Typical Characteristics
- 8 Parameter Measurement Information
-
9 Detailed Description
- 9.1 Overview
- 9.2 Functional Block Diagram
- 9.3
Feature Description
- 9.3.1 Supply Pins
- 9.3.2 Digital Inputs and Outputs
- 9.3.3 GND
- 9.3.4 INH Pin
- 9.3.5 WAKE Pin
- 9.3.6 CAN Bus Pins
- 9.3.7
Faults
- 9.3.7.1
Internal and External Fault Indicators
- 9.3.7.1.1 Power-Up (PWRON Flag)
- 9.3.7.1.2 Wake-Up Request (WAKERQ Flag)
- 9.3.7.1.3 Undervoltage Faults
- 9.3.7.1.4 CAN Bus Fault (CBF Flag)
- 9.3.7.1.5 TXD Clamped Low (TXDCLP Flag)
- 9.3.7.1.6 TXD Dominant State Timeout (TXDDTO Flag)
- 9.3.7.1.7 TXD Shorted to RXD Fault (TXDRXD Flag)
- 9.3.7.1.8 CAN Bus Dominant Fault (CANDOM Flag)
- 9.3.7.1
Internal and External Fault Indicators
- 9.3.8 Local Faults
- 9.4 Device Functional Modes
- 10Application Information Disclaimer
- 11Device and Documentation Support
- 12Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
散熱焊盤機械數據 (封裝 | 引腳)
- DMT|14
訂購信息
10.1.3.1 CAN Termination
Termination may be a single 120-Ω resistor at each end of the bus, either on the cable or in a terminating node. If filtering and stabilization of the common-mode voltage of the bus is desired then split termination may be used, see Figure 10-3. Split termination improves the electromagnetic emissions behavior of the network by filtering higher-frequency common-mode noise that may be present on the differential signal lines.
Figure 10-3 CAN Bus Termination Concepts