4 修訂歷史記錄
Changes from D Revision (August 2015) to E Revision
- Added DW 封裝。Go
- Added Maximum junction temperature to the Absolute Maximum Ratings table Go
- Added IOL for different Tj to the Recommended Operating Conditions tableGo
- Changed ICC standby into different input states, with increased maximums Go
- Changed Cio, Ci maximum Go
- Removed ΔICC spec from the Electrical Characteristics table, added ΔICC typical characteristics graph Go
- Clarified interrupt reset time (tir) with respect to falling edge of ACK related SCL pulse. Go
- Made changes to the Interrupt Output (INT) sectionGo
- Made changes to the Reads section Go
- Added the Calculating Junction Temperature and Power Dissipation sectionGo
- Changed recommended supply sequencing values Go
- Power on reset requirements relaxed Go
Changes from C Revision (May 2015) to D Revision
Changes from B Revision (October 2014) to C Revision
- Added standby mode current for VI = VCC test condition.Go
- Changed ΔICC for one P-port input at VI = VCC - 0.6, and other P-port I/O at VI = VCC or GND.Go
- Added clarification in datasheet that raising voltage above VCC on P-port I/O will result in current flow from P-port to VCC. Go
Changes from A Revision (March 2012) to B Revision
- Added 處理額定值表，特性 說明 部分，器件功能模式，應用和實施部分，電源相關建議部分，布局部分，器件和文檔支持部分以及機械、封裝和可訂購信息部分。Go
- Updated IOL PARAMETER in the Electrical Characteristics table.Go
Changes from * Revision (November 2011) to A Revision