ZHCSHL6B September 2017 – November 2019 TAS5760M-Q1
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 Digital I/O Pins
- 6.6 Master Clock
- 6.7 Serial Audio Port
- 6.8 Protection Circuitry
- 6.9 Speaker Amplifier in All Modes
- 6.10 Speaker Amplifier in Stereo Bridge Tied Load (BTL) Mode
- 6.11 Speaker Amplifier in Mono Parallel Bridge Tied Load (PBTL) Mode
- 6.12 I²C Control Port
- 6.13 Typical Idle, Mute, Shutdown, Operational Power Consumption
- 6.14 Typical Characteristics (Stereo BTL Mode): fSPK_AMP = 384 kHz
- 6.15 Typical Characteristics (Stereo BTL Mode): fSPK_AMP = 768 kHz
- 6.16 Typical Characteristics (Mono PBTL Mode): fSPK_AMP = 384 kHz
- 6.17 Typical Characteristics (Mono PBTL Mode): fSPK_AMP = 768 kHz
- 7 Parameter Measurement Information
-
8 Detailed Description
- 8.1 Overview
- 8.2 Functional Block Diagram
- 8.3 Feature Description
- 8.4
Device Functional Modes
- 8.4.1
Hardware Control Mode
- 8.4.1.1 Speaker Amplifier Shut Down (SPK_SD Pin)
- 8.4.1.2 Serial Audio Port in Hardware Control Mode
- 8.4.1.3 Soft Clipper Control (SFT_CLIP Pin)
- 8.4.1.4 Speaker Amplifier Switching Frequency Select (FREQ/SDA Pin)
- 8.4.1.5 Parallel Bridge Tied Load Mode Select (PBTL/SCL Pin)
- 8.4.1.6 Speaker Amplifier Sleep Enable (SPK_SLEEP/ADR Pin)
- 8.4.1.7 Speaker Amplifier Gain Select (SPK_GAIN [1:0] Pins)
- 8.4.1.8 Considerations for Setting the Speaker Amplifier Gain Structure
- 8.4.2 Software Control Mode
- 8.4.1
Hardware Control Mode
- 8.5
Register Maps
- 8.5.1 Control Port Registers - Quick Reference
- 8.5.2
Control Port Registers - Detailed Description
- 8.5.2.1 Device Identification Register (0x00)
- 8.5.2.2 Power Control Register (0x01)
- 8.5.2.3 Digital Control Register (0x02)
- 8.5.2.4 Volume Control Configuration Register (0x03)
- 8.5.2.5 Left Channel Volume Control Register (0x04)
- 8.5.2.6 Right Channel Volume Control Register (0x05)
- 8.5.2.7 Analog Control Register (0x06)
- 8.5.2.8 Reserved Register (0x07)
- 8.5.2.9 Fault Configuration and Error Status Register (0x08)
- 8.5.2.10 Reserved Controls (9 / 0x09) - (15 / 0x0F)
- 8.5.2.11 Digital Clipper Control 2 Register (0x10)
- 8.5.2.12 Digital Clipper Control 1 Register (0x11)
-
9 Application and Implementation
- 9.1 Application Information
- 9.2
Typical Applications
- 9.2.1 Stereo BTL Using Software Control, 32-Pin DAP Package Option
- 9.2.2 Stereo BTL Using Hardware Control, 32-Pin DAP Package Option
- 9.2.3 Mono PBTL Using Software Control, 32-Pin DAP Package Option
- 9.2.4 Mono PBTL Using Hardware Control, 32-Pin DAP Package Option
- 10Power Supply Recommendations
- 11Layout
- 12器件和文檔支持
- 13機械、封裝和可訂購信息
6.15 Typical Characteristics (Stereo BTL Mode): fSPK_AMP = 768 kHz
At TA = 25°C, fSPK_AMP = 768 kHz, input signal is 1 kHz Sine, unless otherwise noted. Filter used for 8 Ω = 22 µH + 0.68 µF, Filter used for 6 Ω = 15 µH + 0.68 µF, Filter used for 4 Ω = 10 µH + 0.68 µF unless otherwise noted.
Thermal Limits are referenced to TAS5760xxEVM Rev D
Figure 15. Output Power vs PVDD 
PVDD = 24 V, POSPK = 1 W
Figure 17. THD+N vs Frequency 
PVDD = 12 V, Both Channels Driven
Figure 19. THD+N vs Output Power 
PVDD = 24 V, Both Channels Driven
Figure 21. THD+N vs Output Power 
Figure 23. Crosstalk vs Frequency 
Figure 25. Idle Current Draw vs PVDD (Filterless) 
Figure 27. Shutdown Current Draw vs PVDD (Filterless) 
PVDD = 12 V, POSPK = 1 W
Figure 16. THD+N vs Frequency 
Figure 18. Idle Channel Noise vs PVDD 
PVDD = 18 V, Both Channels Driven
Figure 20. THD+N vs Output Power 
Figure 22. Efficiency vs Output Power 
Figure 24. PVDD PSRR vs Frequency 
With LC Filter as Shown on EVM
Figure 26. Idle Current Draw vs PVDD