色婷婷综合久久久中文字幕,伊人久久大香线蕉精品,久久人人爽爽人人爽人人片AV

ZHCSPD4A April 2022 – September 2022 PCM3120-Q1

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

RTE|20
- MPQF596

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

7.4 Electrical Characteristics

at T_A = 25°C, AVDD = 3.3 V, IOVDD = 3.3 V, f_IN = 1-kHz sinusoidal signal, f_S = 48 kHz, 32-bit audio data, BCLK = 256 × f_S, TDM slave mode, and PLL on (unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
ADC CONFIGURATION
	AC input impedance	Input pins INxP or INxM, 2.5-k? input impedance selection		2.5		kΩ
		Input pins INxP or INxM, 10-k? input impedance selection		10
		Input pins INxP or INxM, 20-k? input impednace selection		20
	Channel gain range	Programmable range with 0.5-dB steps	0		42	dB
ADC PERFORMANCE FOR LINE/MICROPHONE INPUT RECORDING : AVDD 3.3-V OPERATION
	Differential input full-scale AC signal voltage	AC-coupled input		2		V_RMS
	Single-ended input full-scale AC signal voltage	AC-coupled input		1		V_RMS
SNR	Signal-to-noise ratio, A-weighted⁽¹⁾⁽²⁾	IN1 differential input selected and AC signal shorted to ground, 10-k? input impedance selection, 0-dB channel gain	100	106		dB
SNR	Signal-to-noise ratio, A-weighted⁽¹⁾⁽²⁾	IN1 differential input selected and AC signal shorted to ground, 10-k? input impedance selection, 12-dB channel gain		100		dB
DR	Dynamic range, A-weighted⁽²⁾	IN1 differential input selected and –60-dB full-scale AC signal input, 10-k? input impedance selection, 0-dB channel gain		107		dB
DR	Dynamic range, A-weighted⁽²⁾	IN1 differential input selected and –72-dB full-scale AC signal input, 10-k? input impedance selection, 12-dB channel gain		100		dB
THD+N	Total harmonic distortion⁽²⁾⁽³⁾	IN1 differential input selected and –1-dB full-scale AC signal input, 10-k? input impedance selection, 0-dB channel gain		–95	–80	dB
THD+N	Total harmonic distortion⁽²⁾⁽³⁾	IN1 differential input selected and –13-dB full-scale AC signal input, 10-k? input impedance selection, 12-dB channel gain		–93		dB
ADC PERFORMANCE FOR LINE/MICROPHONE INPUT RECORDING : AVDD 1.8-V OPERATION
	Differential input full-scale AC signal voltage	AC-coupled Input		1		V_RMS
	Single-ended input full-scale AC signal voltage	AC-coupled Input		0.5		V_RMS
SNR	Signal-to-noise ratio, A-weighted⁽¹⁾⁽²⁾	IN1 differential input selected and AC signal shorted to ground, 10-k? input impedance selection, 0-dB channel gain		100		dB
DR	Dynamic range, A-weighted⁽²⁾	IN1 differential input selected and –60-dB full-scale AC signal input, 10-k? input impedance selection, 0-dB channel gain		101		dB
THD+N	Total harmonic distortion⁽²⁾⁽³⁾	IN1 differential input selected and –2-dB full-scale AC signal Input, 10-k? input impedance selection, 0 dB channel gain		–90		dB
ADC OTHER PARAMETERS
	Digital volume control range	Programmable 0.5-dB steps	–100		27	dB
	Output data sample rate	Programmable	7.35		768	kHz
	Output data sample word length	Programmable	16		32	Bits
	Digital high-pass filter cutoff frequency	First-order IIR filter with programmable coefficients, –3-dB point (default setting)		12		Hz
	Interchannel isolation	–1-dB full-scale AC-signal input to non measurement channel		–124		dB
	Interchannel gain mismatch	–6-dB full-scale AC-signal input and 0-dB channel gain		0.1		dB
	Gain drift⁽⁴⁾	0-dB channel gain, across temperature range –40°C to 125°C		36.8		ppm/°C
	Interchannel phase mismatch	1-kHz sinusoidal signal		0.02		Degrees
	Phase drift⁽⁵⁾	1-kHz sinusoidal signal, across temperature range –40°C to 125°C		0.0005		Degrees/°C
PSRR	Power-supply rejection ratio	100-mV_PP, 1-kHz sinusoidal signal on AVDD, differential input selected, 0-dB channel gain		102		dB
CMRR	Common-mode rejection ratio	Differential microphone input selected, 0-dB channel gain, 100-mV_PP, 1-kHz signal on both pins and measure level at output		60		dB
MICROPHONE BIAS
	MICBIAS noise	BW = 20 Hz to 20 kHz, A-weighted, 1-μF capacitor between MICBIAS and AVSS		2.1		μV_RMS
	MICBIAS voltage	MICBIAS programmed to VREF and VREF programmed to either 2.75 V, 2.5 V, or 1.375 V		VREF		V
		MICBIAS programmed to VREF × 1.096 and VREF programmed to either 2.75 V, 2.5 V, or 1.375 V		VREF × 1.096
		Bypass to AVDD with 5-mA load		AVDD – 0.2
	MICBIAS current drive				5	mA
	MICBIAS load regulation	MICBIAS programmed to either VREF or VREF × 1.096, measured up to max load	0	0.6	1	%
	MICBIAS over current protection threshold		6.1			mA
DIGITAL I/O
V_IL	Low-level digital input logic voltage threshold	All digital pins except IN2P_GPI1 and MICBIAS_GPI2, SDA and SCL, IOVDD 1.8-V operation	–0.3		0.35 × IOVDD	V
V_IL	Low-level digital input logic voltage threshold	All digital pins except IN2P_GPI1 and MICBIAS_GPI2, SDA and SCL, IOVDD 3.3-V operation	–0.3		0.8	V
V_IH	High-level digital input logic voltage threshold	All digital pins except IN2P_GPI1 and MICBIAS_GPI2, SDA and SCL, IOVDD 1.8-V operation	0.65 × IOVDD		IOVDD + 0.3	V
V_IH	High-level digital input logic voltage threshold	All digital pins except IN2P_GPI1 and MICBIAS_GPI2, SDA and SCL, IOVDD 3.3-V operation	2		IOVDD + 0.3	V
V_OL	Low-level digital output voltage	All digital pins except IN2M_GPO1, SDA and SCL, I_OL = –2 mA, IOVDD 1.8-V operation			0.45	V
V_OL	Low-level digital output voltage	All digital pins except IN2M_GPO1, SDA and SCL, I_OL = –2 mA, IOVDD 3.3-V operation			0.4	V
V_OH	High-level digital output voltage	All digital pins except IN2M_GPO1, SDA and SCL, I_OH = 2 mA, IOVDD 1.8-V operation	IOVDD – 0.45			V
V_OH	High-level digital output voltage	All digital pins except IN2M_GPO1, SDA and SCL, I_OH = 2 mA, IOVDD 3.3-V operation	2.4			V
V_IL(I2C)	Low-level digital input logic voltage threshold	SDA and SCL	–0.5		0.3 x IOVDD	V
V_IH(I2C)	High-level digital input logic voltage threshold	SDA and SCL	0.7 x IOVDD		IOVDD + 0.5	V
V_OL1(I2C)	Low-level digital output voltage	SDA, I_OL(I2C) = –3 mA, IOVDD > 2 V			0.4	V
V_OL2(I2C)	Low-level digital output voltage	SDA, I_OL(I2C) = –2 mA, IOVDD ≤ 2 V			0.2 x IOVDD	V
I_OL(I2C)	Low-level digital output current	SDA, V_OL(I2C) = 0.4 V, standard-mode or fast-mode	3			mA
I_OL(I2C)	Low-level digital output current	SDA, V_OL(I2C) = 0.4 V, fast-mode plus	20			mA
I_IH	Input logic-high leakage for digital inputs	All digital pins except IN2P_GPI1 and MICBIAS_GPI2 pins, input = IOVDD	–5	0.1	5	μA
I_IL	Input logic-low leakage for digital inputs	All digital pins except IN2P_GPI1 and MICBIAS_GPI2 pins, input = 0 V	–5	0.1	5	μA
V_IL(GPIx)	Low-level digital input logic voltage threshold	IN2P_GPI1 and MICBIAS_GPI2 digital pins, AVDD 1.8-V operation	–0.3		0.35 × AVDD	V
V_IL(GPIx)	Low-level digital input logic voltage threshold	IN2P_GPI1 and MICBIAS_GPI2 digital pins, AVDD 3.3-V operation	–0.3		0.8	V
V_IH(GPIx)	High-level digital input logic voltage threshold	IN2P_GPI1 and MICBIAS_GPI2 digital pins, AVDD 1.8-V operation	0.65 × AVDD		AVDD + 0.3	V
V_IH(GPIx)	High-level digital input logic voltage threshold	IN2P_GPI1 and MICBIAS_GPI2 digital pins, AVDD 3.3-V operation	2		AVDD + 0.3	V
V_OL(GPOx)	Low-level digital output voltage	IN2M_GPO2 digital pin, I_OL = –2 mA, AVDD 1.8-V operation			0.45	V
V_OL(GPOx)	Low-level digital output voltage	IN2M_GPO2 digital pin, I_OL = –2 mA, AVDD 3.3-V operation			0.4	V
V_OH(GPOx)	High-level digital output voltage	IN2M_GPO2 digital pin, I_OH = 2 mA, AVDD 1.8-V operation	AVDD – 0.45			V
V_OH(GPOx)	High-level digital output voltage	IN2M_GPO2 digital pin, I_OH = 2 mA, AVDD 3.3-V operation	2.4			V
I_IH(GPIx)	Input logic-high leakage for digital inputs	IN2P_GPI1 and MICBIAS_GPI2 digital pins, input = AVDD	–5	0.1	5	μA
I_IL(GPIx)	Input logic-high leakage for digital inputs	IN2P_GPI1 and MICBIAS_GPI2 digital pins, input = 0 V	–5	0.1	5	μA
C_IN	Input capacitance for digital inputs	All digital pins		5		pF
R_PD	Pulldown resistance for digital I/O pins when asserted on			20		kΩ
TYPICAL SUPPLY CURRENT CONSUMPTION
I_AVDD	Current consumption in sleep mode (software shutdown mode)	All external clocks stopped, AVDD = 3.3 V, internal AREG		5		μA
I_AVDD		All external clocks stopped, AVDD = 1.8 V, external AREG supply (AREG shorted to AVDD)		29
I_IOVDD		All external clocks stopped, IOVDD = 3.3 V		0.5
I_IOVDD		All external clocks stopped, IOVDD = 1.8 V		0.5
I_AVDD	Current consumption with ADC 2-channel operating at f_S 48-kHz, PLL off and BCLK = 512 × f_S	AVDD = 3.3 V, internal AREG		11.1		mA
I_AVDD		AVDD = 1.8 V, external AREG supply (AREG shorted to AVDD)		10.5
I_IOVDD		IOVDD = 3.3 V		0.1
I_IOVDD		IOVDD = 1.8 V		0.05
I_AVDD	Current consumption with ADC 2-channel operating at f_S 16-kHz, PLL on and BCLK = 256 × f_S	AVDD = 3.3 V, internal AREG		11.3		mA
I_AVDD		AVDD = 1.8 V, external AREG supply (AREG shorted to AVDD)		10.6
I_IOVDD		IOVDD = 3.3 V		0.05
I_IOVDD		IOVDD = 1.8 V		0.02
I_AVDD	Current consumption with ADC 2-channel operating at f_S 48-kHz, PLL on and BCLK = 256 × f_S	AVDD = 3.3 V, internal AREG		12.2		mA
I_AVDD		AVDD = 1.8 V, external AREG supply (AREG shorted to AVDD)		11.6
I_IOVDD		IOVDD = 3.3 V		0.1
I_IOVDD		IOVDD = 1.8 V		0.05

(1) Ratio of output level with 1-kHz full-scale sine-wave input, to the output level with the AC signal input shorted to ground, measured A-weighted over a 20-Hz to 20-kHz bandwidth using an audio analyzer.

(2) All performance measurements done with 20-kHz low-pass filter and, where noted, A-weighted filter. Failure to use such a filter may result in higher THD and lower SNR and dynamic range readings than shown in the Electrical Characteristics. The low-pass filter removes out-of-band noise, which, although not audible, may affect dynamic specification values.

(3) For best distortion performance, use input AC-coupling capacitors with low-voltage coefficient.

(4) Gain drift = gain variation (in temperature range) / typical gain value (gain at room temperature) / temperature range × 10⁶ measured with gain in linear scale.

(5) Phase drift = phase deviation (in temperature range) / (temperature range).