麻批好紧日起要舒服死了,亚洲国产成人一区二区三区,欧美日韩精品成人网站二区A∨有

ZHCSJ72A December 2018 – December 2021 OPT3004

PRODMIX

封裝選項

機械數(shù)據(jù) (封裝 | 引腳)

DNP|6
- MPDS564B
DTS|8
- MPSS136D

散熱焊盤機械數(shù)據(jù) (封裝 | 引腳)

訂購信息

7.5 Electrical Characteristics

At T_A = 25°C, V_DD = 3.3 V, 800-ms conversion time (CT = 1)⁽²⁾, automatic full-scale range (RN[3:0] = 1100b⁽²⁾), white LED, and normal-angle incidence of light, unless otherwise specified.

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
OPTICAL
	Peak irradiance spectral responsivity				550		nm
	Resolution (LSB)	Lowest full-scale range, RN[3:0] = 0000b⁽²⁾			0.01		lux
	Full-scale illuminance				83865.6		lux
	Measurement output result, USON package	0.64 lux per ADC code, 2620.80 lux full-scale (RN[3:0] = 0110)⁽²⁾, 2000 lux input⁽³⁾		2812	3125	3437	ADC codes
	Measurement output result, USON package			1800	2000	2200	lux
	Measurement output result, SOT-5X3 package	0.64 lux per ADC code, 2620.80 lux full-scale (RN[3:0] = 0110)⁽²⁾, 2000 lux input⁽³⁾		2500	3125	3750	ADC codes
	Measurement output result, SOT-5X3 package			1600	2000	2400	lux
	Relative accuracy between gain ranges⁽¹⁾				0.2%
	Infrared response (850 nm)⁽³⁾	From -85° to +85° angle of incidence			0.2%
	Light source variation (incandescent, halogen, fluorescent)	Bare device, no cover glass			4%
	Linearity	Input illuminance > 40 lux			2%
	Linearity	Input illuminance < 40 lux			5%
	Measurement drift across temperature	Input illuminance = 2000 lux			0.02		%/°C
	Dark condition, ADC output	0.01 lux per ADC code			0	3	ADC codes
	Dark condition, ADC output	0.01 lux per ADC code			0	0.03	lux
	Half-power angle	50% of full-power reading			57		degrees
PSRR	Power-supply rejection ratio	V_DD at 3.6 V and 1.6 V			0.1		%/V⁽⁴⁾
POWER SUPPLY
V_DD	Operating range			1.6		3.6	V
V_I2C	Operating range of I²C pullup resistor	I²C pullup resistor, V_DD ≤ V_I2C		1.6		5.5	V
I_Q	Quiescent current	Dark	Active, V_DD = 3.6 V		1.8	2.5	μA
		Dark	Shutdown (M[1:0] = 00)⁽²⁾, V_DD = 3.6 V		0.3	0.47	μA
		Full-scale lux	Active, V_DD = 3.6 V		3.7		μA
		Full-scale lux	Shutdown, (M[1:0] = 00)⁽²⁾		0.4		μA
POR	Power-on-reset threshold	T_A = 25°C			0.8		V
DIGITAL
	I/O pin capacitance				3		pF
	Total integration time⁽⁵⁾	(CT = 1)⁽²⁾, 800-ms mode, fixed lux range		720	800	880	ms
	Total integration time⁽⁵⁾	(CT = 0)⁽²⁾, 100-ms mode, fixed lux range		90	100	110	ms
V_IL	Low-level input voltage (SDA, SCL, and ADDR)			0		0.3 × V_DD	V
V_IH	High-level input voltage (SDA, SCL, and ADDR)			0.7 × V_DD		5.5	V
I_IL	Low-level input current (SDA, SCL, and ADDR)				0.01	0.25⁽⁶⁾	μA
V_OL	Low-level output voltage (SDA and INT)	I_OL= 3 mA				0.32	V
I_ZH	Output logic high, high-Z leakage current (SDA, INT)	Pin at V_DD			0.01	0.25⁽⁶⁾	μA
TEMPERATURE
	Specified temperature range			–40		85	°C

(1) Characterized by measuring fixed near-full-scale light levels on the higher adjacent full-scale range setting.

(2) Refers to a control field within the configuration register.

(3) Tested with the white LED calibrated to 2k lux and an 850-nm source.

(4) PSRR is the percent change of the measured lux output from its current value, divided by the change in power supply voltage, as characterized by results from 3.6-V and 1.6-V power supplies.

(5) The conversion time, from start of conversion until the data are ready to be read, is the integration time plus 3 ms.

(6) The specified leakage current is dominated by the production test equipment limitations. Typical values are much smaller.