国产高清亚洲日韩一区,日韩一区国产二区欧美三 ,av福利在线网站

ZHCSIE3B June 2018 – May 2019 LMZM33606

PRODUCTION DATA.

封裝選項

請參考 PDF 數據表獲取器件具體的封裝圖。

機械數據 (封裝 | 引腳)

RLX|41

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

zhcsie3b_oa

6.5 Electrical Characteristics

Limits apply over T_A = –40°C to +105°C, V_IN = 24 V, V_OUT = 5 V, I_OUT = I_OUT maximum, f_sw = 500 kHz, FPWM mode (unless otherwise noted); C_IN1 = 3x 10 µF, 50-V, 1210 ceramic; C_IN2 = 2x 4.7 µF, 50-V, 1210 ceramic; C_OUT = 6x 22 µF, 25-V, 1210 ceramic. Minimum and maximum limits are specified through production test or by design. Typical values represent the most likely parametric norm and are provided for reference only.

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
INPUT VOLTAGE (V_IN)
V_IN	Input voltage range	Over I_OUT range, V_OUT = 2.5 V, f_SW = 350 kHz	3.5⁽¹⁾		36	V
	V_IN turn on	V_IN increasing, V_OUT = 2.5 V, I_OUT = 0 A		3.12		V
	V_IN turn off	V_IN decreasing, V_OUT = 2.5 V, I_OUT = 0 A		2.62		V
I_SHDN	Shutdown supply current	V_IN = 12 V, V_EN = 0 V, I_OUT = 0 A		0.8	10	µA
INTERNAL LDO (VCC, BIAS_SEL)
V_CC	Internal V_CC voltage	PWM operation		3.27		V
V_CC	Internal V_CC voltage	PFM operation		3.1		V
I_{BIAS_SEL}	BIAS_SEL quiescent current (non-switching)	V_IN = 12 V, V_FB = 1.5 V, V_EN= 2 V, V_{BIAS_SEL}= 3.3 V		21	50	µA
FEEDBACK
V_FB	Feedback voltage⁽²⁾	–40°C ≤ T_J= T_A≤ 125°C, I_OUT = 0 A, Over V_IN range, V_OUT = 2.5 V, f_SW = 350 kHz	0.987	1.006	1.017	V
V_FB	Load regulation	Over I_OUT range, T_A = 25 °C		0.1%
I_FB	Feedback leakage current	V_FB = 1 V		0.2	65	nA
CURRENT
I_OUT	Output current	Natural convection, T_A = 25 °C	0		6	A
I_OUT	Overcurrent threshold			9		A
PERFORMANCE
?	Efficiency	I_OUT = 3 A, T_A = 25 °C		91%
SOFT START
T_SS	Internal soft start time	SS pin open		5		ms
I_SSC	Soft-start charge current	V_IN = 12 V, V_FB = 1.5 V, V_EN= 2 V, V_SS/TRK= 0.5 V	1.8	2	2.2	µA
ENABLE (EN)
V_EN-H	EN rising threshold		1.14	1.2	1.25	V
V_EN-HYS	EN hysteresis voltage			-100		mV
I_EN	EN Input leakage current	V_IN = 12 V, V_FB = 1.5 V, V_EN= 2 V		1.4	200	nA
POWER GOOD (PGOOD)
V_PGOOD	PGOOD thresholds	Overvoltage	106%	110%	113%
	PGOOD thresholds	Undervoltage	86%	90%	93%
	PGOOD low voltage	0.5-mA pullup, V_EN = 0 V			0.3	V
V_INPG	Minimum V_IN for valid PGOOD	50-μA pullup, V_EN = 0 V, T_J= T_A = 25°C		1.3	2	V

(1) For output voltages ≤ 5 V, the recommended minimum V_IN is 3.5 V or (V_OUT + 1 V), whichever is greater. For output voltages > 5 V,
the recommended minimum V_IN is (1.1 × V_OUT). See Voltage Dropout for more information.

(2) The overall output voltage tolerance will be affected by the tolerance of the external R_FBT and R_FBB resistors.