亚洲毛片多多影院,久久人人爽爽人人爽人人片av,午夜精品久久久内射近拍高清

ZHCSLW5A October 2019 – November 2020 LMR50410-Q1

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

DBV|6
- MPDS026Q

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

7.5 Electrical Characteristics

Limits apply over operating junction temperature (T_J ) range of –40°C to +150°C, unless otherwise stated. Minimum and Maximum limits⁽¹⁾ are specified through test, design or statistical correlation. Typical values represent the most likely parametric norm at T_J = 25°C, and are provided for reference purposes only. Unless otherwise stated, the following conditions apply: V_IN = 4 V to 36 V.

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
SUPPLY VOLTAGE (VIN PIN)
V_{IN_UVLO}	Undervoltage lockout thresholds	Rising threshold	3.55	3.75	4	V
		Falling threshold	3.25	3.45	3.65	V
		Hysteresis		0.3		V
I_Q-nonSW	Operating quiescent current (non-switching)⁽²⁾	V_EN = 3.3 V, VFB=1.1V (PFM variant only)		80	120	μA
I_SD	Shutdown quiescent current; measured at VIN pin	V_EN = 0 V		3	10	μA
ENABLE (EN PIN)
V_EN-VOUT-H	Enable input high-level for V_OUT	V_ENABLE rising	1.1	1.23	1.36	V
V_EN-VOUT-L	Enable input low-level for V_OUT	V_ENABLE falling	0.95	1.1	1.22	V
V_EN-VOUT-HYS	Enable input hysteresis for V_OUT	Hysteresis		130		mV
I_LKG-EN	Enable input leakage current	V_EN = 3.3V		10	200	nA
VOLTAGE REFERENCE (FB PIN)
V_FB	Feedback voltage		0.99	1	1.01	V
V_{OUT-3.3V-Fixed}	Output voltage	Vin=12V	3.25	3.3	3.35	V
V_OUT-5V-Fixed	Output voltage	Vin=12V	4.925	5.0	5.075	V
I_LKG-FB	Feedback leakage current	FB = 1.2 V		0.2		nA
I_{LKG-VOUT-3.3V-Fixed}	Feedback leakage current	V_OUT = 3.3 V (Fixed Option)		1.7		μA
I_{LKG-VOUT-5V-Fixed}	Feedback leakage current	V_OUT = 5V (Fixed Option)		2.6		μA
CURRENT LIMITS AND HICCUP
I_SC	High-side current limit⁽³⁾	Vin=12V	1.25	1.6	1.9	A
I_LS-LIMIT	Low-side current limit⁽³⁾	Vin=12V	0.9	1.1	1.3	A
I_L-ZC	Zero cross detector threshold	PFM variants only		0.02		A
I_L-NEG	Negative current limit⁽³⁾	FPWM variant only		–0.6		A
MOSFETS
R_DS-ON-HS	High-side MOSFET ON-resistance	T_J=25 ℃, V_IN = 12 V		450		mΩ
R_DS-ON-LS	Low-side MOSFET ON-resistance	T_J=25 ℃, V_IN = 12 V		240		mΩ
THERMAL SHUTDOWN
T_SD-Rising⁽¹⁾	Thermal shutdown	Shutdown threshold		170		°C
T_SD-Falling⁽¹⁾	Thermal shutdown	Recovery threshold		158		°C

(1) MIN and MAX limits are 100% production tested at 25°C. Limits over the operating temperature range verified through correlation using
Statistical Quality Control (SQC) methods. Limits are used to calculate Average Outgoing Quality Level (AOQL).

(2) This is the current used by the device open loop. It does not represent the total input current of the system when in regulation.

(3) The current limit values in this table are tested, open loop, in production. They may differ from those found in a closed loop application.