6.1 Absolute Maximum Ratings(1)(2)
| PARAMETER |
MIN |
MAX |
UNIT |
| Supply Voltage (VDD33) |
|
4.2 |
V |
| Supply Voltage (VDD18) |
|
2.35 |
V |
Voltage on any VDD33 Input Pin
(Not to exceed 4.2 V) |
–0.3 |
VDD33 + 0.3 |
V |
Voltage on any VDD33 Output Pin
(Not to exceed 4.2 V) |
–0.3 |
VDD33 + 0.3 |
V |
Voltage on any VDD18 Input or Output Pin (33 to 52)
(Not to exceed 2.35 V) |
–0.3 |
VDD18 + 0.3 |
V |
| Input Current at any pin other than Supply Pins(3) |
|
±25 |
mA |
| Package Input Current (except Supply Pins)(3) |
|
±50 |
mA |
| Maximum Junction Temperature (TA) |
|
150 |
°C |
| Storage Temperature |
–65 |
150 |
°C |
(1) All voltages are measured with respect to VSS = 0 V, unless otherwise specified.
(2) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Recommended Operating Conditions indicate conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. Operation of the device beyond the Recommended Operating Conditions is not recommended
(3) When the input voltage (VIN) at any pin exceeds the power supplies (VIN < VSS or VIN > VDD33), the current at that pin should be limited to 25 mA. The 50-mA maximum package input current rating limits the number of pins that can simultaneously safely exceed the power supplies with an input current of 25 mA to two.