10 Revision History

Changes from Revision F (March 2016) to Revision G (July 2022)

• 更新了整個文檔中的表格、圖和交叉參考的編號格式Go

Changes from Revision E (December 2015) to Revision F (March 2016)

• 更改了節 1中的安全及管理批準列表Go
• 添加了節 1“符合 EN 61010-1 和 EN 60950-1 標準的 TUV 認證”Go
• 將 節 3 的第一段中的文本從“符合 VDE、CSA 和 CQC 認證標準”更改為“符合 VDE、CSA、CQC 和 TUV 認證標準。”Go
• Added Note 1 to Table 5-2 Go
• Added TUV to the Section 5.11 section and Table 5-4. Deleted Note 1 in Table 4 Go
• Changed Figure 7-3 Go

Changes from Revision D (July 2015) to Revision E (December 2015)

• 將 節 1 從8000V_PK V_IOTM 和 2121V_PK V_IORM 增強型更改為：“8000V_PK 增強型...”Go
• 添加了節 1：已完成 DW 封裝認證；已規劃 DWW 認證Go
• 在說明中添加了文本：和超寬體 (DWW) 封裝Go
• 添加了封裝：在器件信息表中添加了超寬 SOIC、DWW (16)Go
• Added the DWW pinout image Go
• Added the DWW package to the Section 5.4 Go
• Changed the MIN value of CMTI in Section 5.6 table From: 70 To: 100 kV/μs, deleted the TYP value of 100 kV/μs Go
• Added the DW package value to the Supply Current section of the Section 5.6 Go
• Added the DWW package value to the Supply Current section of the Section 5.6 Go
• Changed the MIN value of CMTI in Section 5.7 table From: 70 To: 100 kV/μs, deleted the TYP value of 100 kV/μs Go
• Added the DW package value to the Supply Current section of the Section 5.7 Go
• Added the DWW package value to the Supply Current section of the Section 5.7 Go
• Changed the MIN value of CMTI in Section 5.8 table From: 70 To: 100 kV/μs, deleted the TYP value of 100 kV/μs Go
• Added the DW package value to the Supply Current section of the Section 5.8 Go
• Added the DWW package value to the Supply Current section of the Section 5.8 Go
• Changed Parameter information and added the DWW package information in Table 5-1 Go
• Added the DWW package to Table 5-3 Go
• Changed C_IO typ value From: 2 To 1 pF in Table 5-3 Go
• Added the DWW package to Table 5-2 Go
• Added the DWW package information to Table 5-4 Go
• added DWW-16 package options to Table 5-5 Go
• Added t_PHZ, t_PLZ, t_PZH, and t_PZL to Section 5.14 Go
• Added t_PHZ, t_PLZ, t_PZH, and t_PZL to Section 5.15 Go
• Added Figure 6-2 Go
• Changed Table 7-1 Go
• Added text to the Section 8.1 section: "isolation voltage per UL 1577." Go

Changes from Revision C (May 2015) to Revision D (July 2015)

• 向數據表中添加了 ISO7821F 器件Go
• 更改了 節 3 ，以便包含：“ISO7821 器件默認輸出為‘高電平’，ISO7821F 器件默認輸出為‘低電平’。Go
• 更改了 圖 3-1 Go
• Changed Table 5-3 title From: IEC Insulation and Safety-Related Specifications for DW-16 Package To: Package Insulation and Safety-Related Specifications Go
• Changed Figure 5-1, Added Figure 5-2 Go
• Changed t_PLH and t_PHL From: 5.5 V to 5 V in Figure 5-8 Go
• Changed Figure 6-3 Go
• Changed the Section 7.2 Go

Changes from Revision B (April 2015) to Revision C (May 2015)

• 將V_CC1 和 V_CC2 更改為：V_CCI 和 V_CCO，GND1 和 GND2 更改為：GNDI 和 GNDO，并在 圖 3-1 中添加了注釋 1 和 2Go
• Changed the MIN value of CMTI in Section 5.6 table From: 50 To: 70 kV/μs Go
• Changed the MIN value of CMTI in Section 5.7 table From: 50 To: 70 kV/μs Go
• Changed the MIN value of CMTI in Section 5.8 table From: 50 To: 70 kV/μs Go
• Changed the Installation classification of the Table 5-1 to include DW package informationGo
• Added sentence "If the EN pin is available and low then the output goes to high impedance." to the Section 7.1 section Go
• Changed the Section 7.2 to include the EN pin on the Receiver sideGo
• Changed "ISO782W functional modes" To: "ISO7821DW functional modes" in Section 7.4 Go
• Changed Table 7-1 title From: "Functional Table" To: "ISO7821DW Function Table"Go
• Added the Section 7.4.1 section Go
• Changed device number ISO7821 To: ISO7821DW in Figure 8-2 Go

Changes from Revision A (December 2014) to Revision B (April 2015)

• 將文檔標題從“通道數字隔離器”更改為：“通道 1/1 數字隔離器”Go
• 添加了 節 1 ：2.25V 至 5.5V 電平轉換Go
• 更改了節 1中的安全及管理批準列表Go
• 將 節 3 中的文本從“該器件正在接受 VDE 和 CSA 的增強型隔離認證審核。更改為“該器件已通過 VDE、CSA 和 CQC 的增強型隔離認證。”Go
• Added Note (3) to the Section 5.1 tableGo
• Changed From: V_CCX To: V_CCO In I_OH and I_OL of the Section 5.3 table Go
• Changed From: V_CCX To: V_CCI In V_IH and V_IL of the Section 5.3 table Go
• Changed Note (1) of the Section 5.3 table Go
• Changed From: V_CCX To: V_CCO In V_OH of the Section 5.6 table Go
• Changed From: V_CCX To: V_CCO In V_I(HYS) of the Section 5.6 table Go
• Changed From: V_CCX To: V_CCI In I_IH of the Section 5.6 table Go
• Changed From: V_CCX To: V_CCI In CMTI of the Section 5.6 table Go
• Changed From: V_CCX To: V_CCI In Supply Current, DC Signal of the Section 5.6 tableGo
• Changed Note (1) of the Section 5.6 table Go
• Changed From: V_CCX To: V_CCO In V_OH of the Section 5.7 table Go
• Changed From: V_CCX To: V_CCO In V_I(HYS) of the Section 5.7 table Go
• Changed From: V_CCX To: V_CCI In I_IH of the Section 5.7 tableGo
• Changed From: V_CCX To: V_CCI In CMTI of the Section 5.7 table Go
• Changed From: V_CCX To: V_CCI In Supply Current, DC Signal of the Section 5.7 table Go
• Changed Note (1) of the Section 5.7 table Go
• Changed From: V_CCX To: V_CCO In V_OH of the Section 5.8 table Go
• Changed From: V_CCX To: V_CCI In I_IH of the Section 5.8 table Go
• Changed From: V_CCX To: V_CCI In Supply Current, DC Signal of the Section 5.8 table Go
• Changed Note (1) of the Section 5.8 table Go
• Changed the Test Condition of CTI in Table 5-3 Go
• Changed the MIN value of CTI From" > 600 V To: 600 VGo
• Changed Table 5-2 title From: DIN V VDE 0884-10 (VDE V 0884-10) and UL 1577 Insulation Characteristics To: Added the DWW package to Go
• Changed Table 5-2 Go
• Changed columns VDE and CSA to Table 5-4 Go
• Changed title From: IEC Safety Limiting Values To: Section 5.12 Go
• Changed the table in Section 5.12 , added I_S DW-16 package optionsGo
• Changed Figure 5-1 Go
• Changed Figure 6-1 Go
• Changed From: V_CC1 To: V_CCI in Figure 6-3 Go
• Changed Figure 6-4 Go
• Deleted INPUT-SIDE and OUTPUT-SIDE from columns 1 and 2 of Table 7-1 Go
• Changed Note (1) of Table 7-1 Go
• Changed the Section 8.1 sectionGo
• Changed the Section 8.2 section and Figure 8-1 Go
• Added text and Figure 8-2 to the Section 8.2.2 section Go

Changes from Revision * (November 2014) to Revision A (December 2014)

• 將僅包含第 1 頁和引腳分配部分的產品預發布更改為：完整數據表Go