ZHCSH31B August 2017 – February 2018 DRV10987
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 說明 （續）
- 6 Pin Configuration and Functions
- 7 Specifications
-
8 Detailed Description
- 8.1 Overview
- 8.2 Functional Block Diagram
- 8.3 Feature Description
- 8.4
Device Functional Modes
- 8.4.1 Motor Parameters
- 8.4.2 Starting the Motor Under Different Initial Conditions
- 8.4.3 Motor Start Sequence
- 8.4.4 Align Current
- 8.4.5 Start-Up Current Setting
- 8.4.6 Closed Loop
- 8.4.7 Current Limits
- 8.4.8 Lock Detect and Fault Handling
- 8.4.9 Anti-Voltage Surge Function
- 8.4.10 PWM Output
- 8.4.11 FG Customized Configuration
- 8.4.12
Diagnostics and Visibility
- 8.4.12.1 Motor-Status Readback
- 8.4.12.2 Motor-Speed Readback
- 8.4.12.3 Motor Electrical-Period Readback
- 8.4.12.4 BEMF Constant Readback
- 8.4.12.5 Motor Estimated Position by IPD
- 8.4.12.6 Supply-Voltage Readback
- 8.4.12.7 Speed-Command Readback
- 8.4.12.8 Speed-Command Buffer Readback
- 8.4.12.9 Fault Diagnostics
- 8.5
Register Maps
- 8.5.1 I2C Serial Interface
- 8.5.2 Register Map
- 8.5.3
Register Descriptions
- 8.5.3.1 FaultReg Register (address = 0x00) [reset = 0x00]
- 8.5.3.2 MotorSpeed Register (address = 0x01) [reset = 0x00]
- 8.5.3.3 MotorPeriod Register (address = 0x02) [reset = 0x00]
- 8.5.3.4 MotorKt Register (address = 0x03) [reset = 0x00]
- 8.5.3.5 MotorCurrent Register (address = 0x04) [reset = 0x00]
- 8.5.3.6 IPDPosition–SupplyVoltage Register (address = 0x05) [reset = 0x00]
- 8.5.3.7 SpeedCmd–spdCmdBuffer Register (address = 0x06) [reset = 0x00]
- 8.5.3.8 AnalogInLvl Register (address = 0x07) [reset = 0x00]
- 8.5.3.9 DeviceID–RevisionID Register (address = 0x08) [reset = 0x00]
- 8.5.3.10 Unused Registers (addresses = 0x011 Through 0x2F)
- 8.5.3.11 SpeedCtrl Register (address = 0x30) [reset = 0x00]
- 8.5.3.12 EEPROM Programming1 Register (address = 0x31) [reset = 0x00]
- 8.5.3.13 EEPROM Programming2 Register (address = 0x32) [reset = 0x00]
- 8.5.3.14 EEPROM Programming3 Register (address = 0x33) [reset = 0x00]
- 8.5.3.15 EEPROM Programming4 Register (address = 0x34) [reset = 0x00]
- 8.5.3.16 EEPROM Programming5 Register (address = 0xYY) [reset = 0x00]
- 8.5.3.17 EEPROM Programming6 Register (address = 0x36) [reset = 0x00]
- 8.5.3.18 Unused Registers (addresses = 0x37 Through 0x5F)
- 8.5.3.19 EECTRL Register (address = 0x60) [reset = 0x00]
- 8.5.3.20 Unused Registers (addresses = 0x61 Through 0x8F)
- 8.5.3.21 CONFIG1 Register (address = 0x90) [reset = 0x00]
- 8.5.3.22 CONFIG2 Register (address = 0x91) [reset = 0x00]
- 8.5.3.23 CONFIG3 Register (address = 0x92) [reset = 0x00]
- 8.5.3.24 CONFIG4 Register (address = 0x93) [reset = 0x00]
- 8.5.3.25 CONFIG5 Register (address = 0x94) [reset = 0x00]
- 8.5.3.26 CONFIG6 Register (address = 0x95) [reset = 0x00]
- 8.5.3.27 CONFIG7 Register (address = 0x96) [reset = 0x00]
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12器件和文檔支持
- 13機械、封裝和可訂購信息
8.4.12.5 Motor Estimated Position by IPD
After inductive sense is executed, the rotor position is detected within 60 electrical degrees of resolution. The position is stored in register IPDPosition.
The value stored in IPDPosition corresponds to one of the six motor positions plus the IPD advance angle as shown in Table 8. For more information about IPD, see Initial Position Detect (IPD).
Table 8. IPD Position Read Back
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Rotor position (°) | 0 | 60 | 120 | 180 | 240 | 300 |
| Data1 | 0 | 43 | 85 | 128 | 171 | 213 |
| IPD advance angle | 30 | 60 | 90 | 120 | ||
| Data2 | 22 | 44 | 63 | 85 | ||
| Register data | (Data1 + Data2) mod (256) | |||||