ZHCSH31B August 2017 – February 2018 DRV10987
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 說明 （續）
- 6 Pin Configuration and Functions
- 7 Specifications
-
8 Detailed Description
- 8.1 Overview
- 8.2 Functional Block Diagram
- 8.3 Feature Description
- 8.4
Device Functional Modes
- 8.4.1 Motor Parameters
- 8.4.2 Starting the Motor Under Different Initial Conditions
- 8.4.3 Motor Start Sequence
- 8.4.4 Align Current
- 8.4.5 Start-Up Current Setting
- 8.4.6 Closed Loop
- 8.4.7 Current Limits
- 8.4.8 Lock Detect and Fault Handling
- 8.4.9 Anti-Voltage Surge Function
- 8.4.10 PWM Output
- 8.4.11 FG Customized Configuration
- 8.4.12
Diagnostics and Visibility
- 8.4.12.1 Motor-Status Readback
- 8.4.12.2 Motor-Speed Readback
- 8.4.12.3 Motor Electrical-Period Readback
- 8.4.12.4 BEMF Constant Readback
- 8.4.12.5 Motor Estimated Position by IPD
- 8.4.12.6 Supply-Voltage Readback
- 8.4.12.7 Speed-Command Readback
- 8.4.12.8 Speed-Command Buffer Readback
- 8.4.12.9 Fault Diagnostics
- 8.5
Register Maps
- 8.5.1 I2C Serial Interface
- 8.5.2 Register Map
- 8.5.3
Register Descriptions
- 8.5.3.1 FaultReg Register (address = 0x00) [reset = 0x00]
- 8.5.3.2 MotorSpeed Register (address = 0x01) [reset = 0x00]
- 8.5.3.3 MotorPeriod Register (address = 0x02) [reset = 0x00]
- 8.5.3.4 MotorKt Register (address = 0x03) [reset = 0x00]
- 8.5.3.5 MotorCurrent Register (address = 0x04) [reset = 0x00]
- 8.5.3.6 IPDPosition–SupplyVoltage Register (address = 0x05) [reset = 0x00]
- 8.5.3.7 SpeedCmd–spdCmdBuffer Register (address = 0x06) [reset = 0x00]
- 8.5.3.8 AnalogInLvl Register (address = 0x07) [reset = 0x00]
- 8.5.3.9 DeviceID–RevisionID Register (address = 0x08) [reset = 0x00]
- 8.5.3.10 Unused Registers (addresses = 0x011 Through 0x2F)
- 8.5.3.11 SpeedCtrl Register (address = 0x30) [reset = 0x00]
- 8.5.3.12 EEPROM Programming1 Register (address = 0x31) [reset = 0x00]
- 8.5.3.13 EEPROM Programming2 Register (address = 0x32) [reset = 0x00]
- 8.5.3.14 EEPROM Programming3 Register (address = 0x33) [reset = 0x00]
- 8.5.3.15 EEPROM Programming4 Register (address = 0x34) [reset = 0x00]
- 8.5.3.16 EEPROM Programming5 Register (address = 0xYY) [reset = 0x00]
- 8.5.3.17 EEPROM Programming6 Register (address = 0x36) [reset = 0x00]
- 8.5.3.18 Unused Registers (addresses = 0x37 Through 0x5F)
- 8.5.3.19 EECTRL Register (address = 0x60) [reset = 0x00]
- 8.5.3.20 Unused Registers (addresses = 0x61 Through 0x8F)
- 8.5.3.21 CONFIG1 Register (address = 0x90) [reset = 0x00]
- 8.5.3.22 CONFIG2 Register (address = 0x91) [reset = 0x00]
- 8.5.3.23 CONFIG3 Register (address = 0x92) [reset = 0x00]
- 8.5.3.24 CONFIG4 Register (address = 0x93) [reset = 0x00]
- 8.5.3.25 CONFIG5 Register (address = 0x94) [reset = 0x00]
- 8.5.3.26 CONFIG6 Register (address = 0x95) [reset = 0x00]
- 8.5.3.27 CONFIG7 Register (address = 0x96) [reset = 0x00]
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12器件和文檔支持
- 13機械、封裝和可訂購信息
8.4.3.5.2.1 IPD Operation
IPD operates by sequentially applying voltage across two of the three motor phases according to the following sequence: VW WV UV VU WU UW (see Figure 20). When the current reaches the threshold configured in IPDCurrThr[3:0], the voltage across the motor is stopped. The DRV10987 device measures the time it takes from when the voltage is applied until the current threshold is reached. The time varies as a function of the inductance in the motor windings. The state with the shortest time represents the state with the minimum inductance. The minimum inductance is because of the alignment of the north pole of the motor with this particular driving state.
Figure 20. IPD Function