TPS63031
- Input voltage range: 1.8 V to 5.5 V
- Fixed and adjustable output voltage options from 1.2 V to 5.5 V
- Up to 96% efficiency
- 800-mA Output current at 3.3 V in step-down mode (VIN = 3.6 V to 5.5 V)
- Up to 500-mA output current at 3.3 V in boost mode (VIN > 2.4 V)
- Automatic transition between step-down and boost mode
- Device quiescent current less than 50 μA
- Power-save mode for improved efficiency at low-output power
- Forced fixed frequency operation and synchronization possible
- Load disconnect during shutdown
- Overtemperature protection
- Available in a small 2.5-mm × 2.5-mm 10-pin VSON package (QFN)
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed-frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low-load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5-mm × 2.5-mm (DSK).
技術文檔
| 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 數據表 | TPS6303x High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches 數據表 (Rev. D) | PDF | HTML | 2020年 3月 30日 | ||
| 應用手冊 | QFN 和 SON PCB 連接 (Rev. C) | PDF | HTML | 英語版 (Rev.C) | PDF | HTML | 2024年 1月 5日 | |
| 應用手冊 | 4??? ? ??? ?? ??? ?? ?? (Rev. C) | PDF | HTML | 2023年 10月 2日 | |||
| 應用手冊 | 降低直流/直流降壓/升壓轉換器輻射 EMI 的層設計 (Rev. A) | PDF | HTML | 英語版 (Rev.A) | PDF | HTML | 2021年 7月 16日 | |
| 應用手冊 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018年 12月 11日 | ||||
| 應用手冊 | Understanding Undervoltage Lockout in Power Devices (Rev. A) | 2018年 9月 19日 | ||||
| 選擇指南 | 電源管理指南 2018 (Rev. K) | 2018年 7月 31日 | ||||
| 應用手冊 | Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B) | 2018年 7月 9日 | ||||
| 選擇指南 | 電源管理指南 2018 (Rev. R) | 2018年 6月 25日 | ||||
| 白皮書 | Power Management Solutions for Ultra-Low-Power 16-Bit MSP430 MCUs (Rev. D) | 2012年 3月 28日 | ||||
| 模擬設計期刊 | IQ:它是什么、不是什么以及如何使用 | 英語版 | 2011年 8月 17日 | |||
| 應用手冊 | 最小化升壓轉換器開關節點處的振鈴 | 英語版 | 2008年 7月 15日 |
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
TPS63031 Unencrypted PSpice Transient Model Package (Rev. A)
TIDM-AIRQUALITYSENSOR — MSP430FR4133 微控制器空氣質量傳感器參考設計
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| WSON (DSK) | 10 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。