主頁 電源管理 LED 驅動器 背光 LED 驅動器

TPS61166

正在供貨

具有集成功率二極管和快速突發調光模式的白光 LED 驅動器

產品詳情

Number of channels 1 Vin (min) (V) 2.5 Vin (max) (V) 10 Vout (min) (V) 2.5 Vout (max) (V) 17 Type Inductive Switching frequency (max) (kHz) 1400 Duty cycle (max) (%) 93 LED current per channel (mA) 400 Peak efficiency (%) 85 Topology Boost Features EasyScale 1-Wire Interface, OVP Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 1 Vin (min) (V) 2.5 Vin (max) (V) 10 Vout (min) (V) 2.5 Vout (max) (V) 17 Type Inductive Switching frequency (max) (kHz) 1400 Duty cycle (max) (%) 93 LED current per channel (mA) 400 Peak efficiency (%) 85 Topology Boost Features EasyScale 1-Wire Interface, OVP Operating temperature range (°C) -40 to 85 Rating Catalog
WSON (DSK) 10 6.25 mm2 2.5 x 2.5
  • IC Supply Range: 2.5-V to 6-V
  • Power Stage Input Range: 4.5-V to 10-V
  • Integrated 1.1-A / 20-V Internal Switch FET and Power Diode
  • Drive up to 5 LEDs in Series
  • Fast on/off LED Current Within 1-μs in Brightness Dimming
  • Burst PWM Dimming Method With Frequency Range From 60-Hz to 40-kHz
  • Built-in Soft Start-up
  • Over Load Protection
  • Over Voltage Protection
  • 2.5 × 2.5 × 0.8 mm SON Package
  • APPLICATIONS
    • Small Form Factor LCD Backlight
    • Mobile Phone
    • Digital Camera
    • Personal Camcorder
    • Single Lens Reflex
  • IC Supply Range: 2.5-V to 6-V
  • Power Stage Input Range: 4.5-V to 10-V
  • Integrated 1.1-A / 20-V Internal Switch FET and Power Diode
  • Drive up to 5 LEDs in Series
  • Fast on/off LED Current Within 1-μs in Brightness Dimming
  • Burst PWM Dimming Method With Frequency Range From 60-Hz to 40-kHz
  • Built-in Soft Start-up
  • Over Load Protection
  • Over Voltage Protection
  • 2.5 × 2.5 × 0.8 mm SON Package
  • APPLICATIONS
    • Small Form Factor LCD Backlight
    • Mobile Phone
    • Digital Camera
    • Personal Camcorder
    • Single Lens Reflex

The TPS61166 is a boost converter with a 20-V rated integrated switch FET and power diode that drives up to 5 LEDs in series. This device integrates a high side switch FET that can turn on/off the LED current within 1-µs of the applied external PWM signal. The high side switch also provides input-to-output isolation during IC shutdown.

The default white LED current is set with the external sensor resistor R1, and the feedback voltage is regulated to 200-mV, as shown in the typical application circuit. The LED current can be adjusted using a pulse width modulation (PWM) signal through the PWM pin. The LED current is synchronized to the PWM signal. The device does not discharge the output ceramic capacitor during dimming, thus reducing audible noise when dimming.

Separating the IC input (VIN pin) and power stage input (VBAT pin) makes the device flexible enough to support single- or two-cell Li-ion battery applications. Other protection features include 1.1-A peak-to-peak over current protection (OCP), over voltage protection (OVP), over load protection (OLP), and thermal shutdown. The TPS61166 is available in a 2.5 mm × 2.5 mm SON package with thermal pad.

The TPS61166 is a boost converter with a 20-V rated integrated switch FET and power diode that drives up to 5 LEDs in series. This device integrates a high side switch FET that can turn on/off the LED current within 1-µs of the applied external PWM signal. The high side switch also provides input-to-output isolation during IC shutdown.

The default white LED current is set with the external sensor resistor R1, and the feedback voltage is regulated to 200-mV, as shown in the typical application circuit. The LED current can be adjusted using a pulse width modulation (PWM) signal through the PWM pin. The LED current is synchronized to the PWM signal. The device does not discharge the output ceramic capacitor during dimming, thus reducing audible noise when dimming.

Separating the IC input (VIN pin) and power stage input (VBAT pin) makes the device flexible enough to support single- or two-cell Li-ion battery applications. Other protection features include 1.1-A peak-to-peak over current protection (OCP), over voltage protection (OVP), over load protection (OLP), and thermal shutdown. The TPS61166 is available in a 2.5 mm × 2.5 mm SON package with thermal pad.

下載 觀看帶字幕的視頻 視頻

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 7
類型 標題 下載最新的英語版本 日期
* 數據表 White LED Driver With Integrated Power Diode and Fast Burst Mode Dimming 數據表 2009年 9月 16日
白皮書 常見 LED 功能和 LED 驅動器設計注意事項 英語版 2020年 9月 21日
應用手冊 Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018年 12月 11日
選擇指南 電源管理指南 2018 (Rev. K) 2018年 7月 31日
選擇指南 電源管理指南 2018 (Rev. R) 2018年 6月 25日
應用手冊 How to Use Analog Dimming With TPS6116x 2011年 8月 5日
用戶指南 TPS61166EVM-446 2009年 10月 29日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

計算工具

SLVC366 — Design Tool for Analog Dimming Using a PWM Signal

支持的產品和硬件

支持的產品和硬件

產品
汽車 LED 驅動器
TPS61161-Q1 — 采用 2mm x 2mm QFN 封裝且具有數字和 PWM 亮度控制功能的汽車類白光 LED 驅動器
背光 LED 驅動器
TPS61160 — 采用 2mm x 2mm 封裝且具有數字和 PWM 亮度控制功能的白光 LED 驅動器 TPS61160A — 采用 2mm x 2mm 封裝且具有 PWM 亮度控制功能的白光 LED 驅動器，支持多達 10 個串聯 LED TPS61161 — 采用 2mm x 2mm WSON 封裝且具有數字和 PWM 亮度控制功能的白光 LED 驅動器 TPS61165 — 采用 2mm x 2mm QFN 封裝的高亮度白光 LED 驅動器 TPS61166 — 具有集成功率二極管和快速突發調光模式的白光 LED 驅動器
AC/DC 和 DC/DC 轉換器（集成 FET）
TLV62130A — 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V、3A 降壓轉換器 TLV62150A — 采用 3x3 QFN 封裝、具有 DCS-Control 的 4V 至 17V、1A 降壓轉換器 TPS62130 — 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V、3A 降壓轉換器 TPS62130A — 采用 3x3 QFN 封裝、具有 DCS-control 的 3V 至 17V 3A 降壓轉換器 TPS62140 — 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V、2A 降壓轉換器 TPS62140A — 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V、2A 降壓轉換器 TPS62150 — 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V、1A 降壓轉換器 TPS62150A — 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V 1A 降壓轉換器
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用，包括業內超大的模型庫之一，涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫，您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案，然后再進行布局和制造，可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中，您可以搜索 TI (...)
發送申請
封裝 引腳 CAD 符號、封裝和 3D 模型
WSON (DSK) 10 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

支持和培訓

可獲得 TI 工程師技術支持的 TI E2E? 論壇

所有內容均由 TI 和社區貢獻者按“原樣”提供，并不構成 TI 規范。請參閱使用條款。

如果您對質量、包裝或訂購 TI 產品有疑問，請參閱 TI 支持。??????????????

視頻