主頁 電源管理 LED 驅動器 汽車 LED 驅動器

TPS61161-Q1

正在供貨

采用 2mm x 2mm QFN 封裝且具有數字和 PWM 亮度控制功能的汽車類白光 LED 驅動器

產品詳情

Number of channels 1 Topology Boost Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 2.7 Vin (max) (V) 18 Vout (min) (V) 2.7 Vout (max) (V) 38 Iout (max) (A) 0.02 Iq (typ) (mA) 1.5 Switching frequency (max) (kHz) 600 Features Global dimming, Thermal shutdown
Number of channels 1 Topology Boost Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 2.7 Vin (max) (V) 18 Vout (min) (V) 2.7 Vout (max) (V) 38 Iout (max) (A) 0.02 Iq (typ) (mA) 1.5 Switching frequency (max) (kHz) 600 Features Global dimming, Thermal shutdown
WSON (DRV) 6 4 mm2 2 x 2
  • Qualified for Automotive Applications
  • 2.7-V to 18-V Input Voltage Range
  • 38-V Open LED Protection for 10 LEDs
  • 200-mV Reference Voltage With ±2% Accuracy
  • Flexible Digital and PWM Brightness Control
  • Built-In Soft Start
  • Up to 90% Efficiency
  • 2-mm × 2-mm × 0.8-mm 6-pin QFN (DRV)
    Package With Thermal Pad
  • Qualified for Automotive Applications
  • 2.7-V to 18-V Input Voltage Range
  • 38-V Open LED Protection for 10 LEDs
  • 200-mV Reference Voltage With ±2% Accuracy
  • Flexible Digital and PWM Brightness Control
  • Built-In Soft Start
  • Up to 90% Efficiency
  • 2-mm × 2-mm × 0.8-mm 6-pin QFN (DRV)
    Package With Thermal Pad

With a 40-V rated integrated switch FET, the TPS61161-Q1 is a boost converter that drives up to 10 LEDs in series. The boost converter runs at 600-kHz fixed switching frequency to reduce output ripple, improve conversion efficiency, and allow for the use of small external components.

The default white LED current is set with the external sensor resistor Rset, and the feedback voltage is regulated to 200 mV, as shown in the typical application. During the operation, the LED current can be controlled using the 1-wire digital interface (EasyScale protocol) through the CTRL pin. Alternatively, a pulse width modulation (PWM) signal can be applied to the CTRL pin through which the duty cycle determines the feedback reference voltage. In either digital or PWM mode, the TPS61161-Q1 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS61161-Q1 to prevent the output from exceeding the absolute maximum ratings during open LED conditions.

The TPS61161 is available in a space-saving, 2-mm × 2-mm QFN (DRV) package with thermal pad.

With a 40-V rated integrated switch FET, the TPS61161-Q1 is a boost converter that drives up to 10 LEDs in series. The boost converter runs at 600-kHz fixed switching frequency to reduce output ripple, improve conversion efficiency, and allow for the use of small external components.

The default white LED current is set with the external sensor resistor Rset, and the feedback voltage is regulated to 200 mV, as shown in the typical application. During the operation, the LED current can be controlled using the 1-wire digital interface (EasyScale protocol) through the CTRL pin. Alternatively, a pulse width modulation (PWM) signal can be applied to the CTRL pin through which the duty cycle determines the feedback reference voltage. In either digital or PWM mode, the TPS61161-Q1 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS61161-Q1 to prevent the output from exceeding the absolute maximum ratings during open LED conditions.

The TPS61161 is available in a space-saving, 2-mm × 2-mm QFN (DRV) package with thermal pad.

下載 觀看帶字幕的視頻 視頻

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 3
類型 標題 下載最新的英語版本 日期
* 數據表 TPS61161-Q1 White Led Driver with Digital and Pwm Brightness Control for up to 10 LEDs In Series 數據表 (Rev. A) PDF | HTML 2014年 11月 6日
應用手冊 Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018年 12月 11日
應用手冊 How to Use Analog Dimming With TPS6116x 2011年 8月 5日

設計和開發

如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。

計算工具

SLVC366 Design Tool for Analog Dimming Using a PWM Signal

支持的產品和硬件

支持的產品和硬件

產品
汽車 LED 驅動器
TPS61161-Q1 采用 2mm x 2mm QFN 封裝且具有數字和 PWM 亮度控制功能的汽車類白光 LED 驅動器
背光 LED 驅動器
TPS61160 采用 2mm x 2mm 封裝且具有數字和 PWM 亮度控制功能的白光 LED 驅動器 TPS61160A 采用 2mm x 2mm 封裝且具有 PWM 亮度控制功能的白光 LED 驅動器,支持多達 10 個串聯 LED TPS61161 采用 2mm x 2mm WSON 封裝且具有數字和 PWM 亮度控制功能的白光 LED 驅動器 TPS61165 采用 2mm x 2mm QFN 封裝的高亮度白光 LED 驅動器 TPS61166 具有集成功率二極管和快速突發調光模式的白光 LED 驅動器
AC/DC 和 DC/DC 轉換器(集成 FET)
TLV62130A 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V、3A 降壓轉換器 TLV62150A 采用 3x3 QFN 封裝、具有 DCS-Control 的 4V 至 17V、1A 降壓轉換器 TPS62130 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V、3A 降壓轉換器 TPS62130A 采用 3x3 QFN 封裝、具有 DCS-control 的 3V 至 17V 3A 降壓轉換器 TPS62140 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V、2A 降壓轉換器 TPS62140A 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V、2A 降壓轉換器 TPS62150 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V、1A 降壓轉換器 TPS62150A 采用 3x3 QFN 封裝、具有 DCS-Control 的 3V 至 17V 1A 降壓轉換器
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用,包括業內超大的模型庫之一,涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
封裝 引腳 CAD 符號、封裝和 3D 模型
WSON (DRV) 6 Ultra Librarian

訂購和質量

包含信息:
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息:
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻