主頁 電源管理 多通道 IC (PMIC)

LP8758-E3

正在供貨

四通道、單相、4A 輸出直流/直流降壓轉換器

產品詳情

Product type Processor and FPGA Regulated outputs (#) 4 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 0 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Vout (min) (V) 0.5 Vout (max) (V) 3.36 Iout (max) (A) 4 Configurability Factory programmable, Software configurable Features Adjustable current limit, Dynamic voltage scaling, Enable, I2C, Light-load efficiency, Multiple outputs, Output discharge, Phase interleaving, Power good, Remote sense, Synchronous rectification Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.006 Switching frequency (max) (kHz) 3000 Shutdown current (ISD) (typ) (μA) 1 Switching frequency (typ) (kHz) 3000
Product type Processor and FPGA Regulated outputs (#) 4 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 0 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Vout (min) (V) 0.5 Vout (max) (V) 3.36 Iout (max) (A) 4 Configurability Factory programmable, Software configurable Features Adjustable current limit, Dynamic voltage scaling, Enable, I2C, Light-load efficiency, Multiple outputs, Output discharge, Phase interleaving, Power good, Remote sense, Synchronous rectification Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.006 Switching frequency (max) (kHz) 3000 Shutdown current (ISD) (typ) (μA) 1 Switching frequency (typ) (kHz) 3000
DSBGA (YFF) 35 6.6 mm2 2.2 x 3
  • Fully Integrated Quad Buck, up to 4-A Programmable Maximum Output Current Per Buck
    • Auto PWM-PFM and Forced-PWM Operations
    • Programmable Output Voltage Slew Rate From 30 mV/μs to 0.5 mV/μs
    • Input Voltage Range: 2.5 V to 5.5 V
    • VOUT Range: 0.5 V to 3.36 V with DVS
  • Programmable Start-Up and Shutdown Sequencing With Enable Signal
  • I2C-Compatible Interface That Supports Standard (100 kHz), Fast (400 kHz),
    Fast+ (1 MHz), and High-Speed (3.4 MHz) Modes
  • Interrupt Function with Programmable Masking
  • Load Current Measurement
  • Output Short-Circuit and Overload Protection
  • Spread-Spectrum Mode for EMI Reduction
  • The Four Buck Cores Operate 90° out of Phase Thereby Reducing Input Ripple Current
  • Overtemperature Warning and Protection
  • Undervoltage Lockout (UVLO)
  • Fully Integrated Quad Buck, up to 4-A Programmable Maximum Output Current Per Buck
    • Auto PWM-PFM and Forced-PWM Operations
    • Programmable Output Voltage Slew Rate From 30 mV/μs to 0.5 mV/μs
    • Input Voltage Range: 2.5 V to 5.5 V
    • VOUT Range: 0.5 V to 3.36 V with DVS
  • Programmable Start-Up and Shutdown Sequencing With Enable Signal
  • I2C-Compatible Interface That Supports Standard (100 kHz), Fast (400 kHz),
    Fast+ (1 MHz), and High-Speed (3.4 MHz) Modes
  • Interrupt Function with Programmable Masking
  • Load Current Measurement
  • Output Short-Circuit and Overload Protection
  • Spread-Spectrum Mode for EMI Reduction
  • The Four Buck Cores Operate 90° out of Phase Thereby Reducing Input Ripple Current
  • Overtemperature Warning and Protection
  • Undervoltage Lockout (UVLO)

The LP8758-E3 device is designed to meet power management requirements for low-power processors in mobile phones, network cards, and similar applications. The device contains four step-down DC-DC converter cores, providing four output voltage rails. The device is controlled by an I2C-compatible serial interface.

The automatic PWM-PFM (AUTO mode) operation maximizes efficiency over a wide output-current range.

The LP8758-E3 supports programmable start-up and shutdown sequencing synchronized to hardware Enable input signal.

The protection features include short-circuit protection, current limits, input supply UVLO, and temperature warning and shutdown functions. Several error flags are provided for status information of the device. In addition, the LP8758-E3 device supports load current measurement without the addition of external current sense resistors. During start-up and voltage change, the device controls the output slew rate to minimize output voltage overshoot and the inrush current.

The LP8758-E3 device is designed to meet power management requirements for low-power processors in mobile phones, network cards, and similar applications. The device contains four step-down DC-DC converter cores, providing four output voltage rails. The device is controlled by an I2C-compatible serial interface.

The automatic PWM-PFM (AUTO mode) operation maximizes efficiency over a wide output-current range.

The LP8758-E3 supports programmable start-up and shutdown sequencing synchronized to hardware Enable input signal.

The protection features include short-circuit protection, current limits, input supply UVLO, and temperature warning and shutdown functions. Several error flags are provided for status information of the device. In addition, the LP8758-E3 device supports load current measurement without the addition of external current sense resistors. During start-up and voltage change, the device controls the output slew rate to minimize output voltage overshoot and the inrush current.

下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

功能與比較器件相同，但引腳排列有所不同
LP8758-EA 正在供貨 四路、單相、4A 輸出直流/直流降壓轉換器 Same functionality but pre-programmed to power different application processor

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 2
類型 標題 下載最新的英語版本 日期
* 數據表 LP8758-E3 Four 4-A Output Synchronous Step-Down DCDC Converters 數據表 PDF | HTML 2020年 2月 27日
用戶指南 LP8758 Quick Sample Module User Guide PDF | HTML 2022年 8月 25日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

評估板

LP8758-E0EVM — LP8758-E0 四輸出降壓 DC-DC 穩壓器評估模塊

LP8758-E0EVM 客戶評估模塊可演示德州儀器 (TI) 的 LP8758-E0 器件。LP8758-E0 旨在滿足手機、網卡和類似應用中的低功耗處理器的電源管理要求。此器件包含四個降壓直流/直流轉換器核心，從而提供四個輸出電壓軌。

用戶指南: PDF
TI.com 上無現貨
評估模塊 (EVM) 用 GUI

SNVC189 — LP8758-xxEVM GUI

支持的產品和硬件

支持的產品和硬件

產品
多通道 IC (PMIC)
LP8758-B0 — 四相、單路 16A 輸出直流/直流降壓轉換器 LP8758-E0 — 四通道、單相、4A 輸出直流/直流降壓轉換器 LP8758-E3 — 四通道、單相、4A 輸出直流/直流降壓轉換器 LP8758-EA — 四路、單相、4A 輸出直流/直流降壓轉換器
硬件開發
評估板
LP8758-E0EVM — LP8758-E0 四輸出降壓 DC-DC 穩壓器評估模塊 LP8758EVM — LP8758-B0 四相 DC-DC 降壓轉換器評估模塊
支持軟件

SNVC186 — LP8758EVM Qt Source

支持的產品和硬件

支持的產品和硬件

產品
多通道 IC (PMIC)
LP8758-B0 — 四相、單路 16A 輸出直流/直流降壓轉換器 LP8758-E0 — 四通道、單相、4A 輸出直流/直流降壓轉換器 LP8758-E3 — 四通道、單相、4A 輸出直流/直流降壓轉換器 LP8758-EA — 四路、單相、4A 輸出直流/直流降壓轉換器
硬件開發
評估板
LM26480SQ-AAEV — LM26480SQ-AA 評估板 LP8758EVM — LP8758-B0 四相 DC-DC 降壓轉換器評估模塊
仿真模型

LP8758-E0 LOAD TRANSIENT TINA-TI Transient Reference Design

SNVMBG8.TSC (596 KB) - TINA-TI Reference Design
下載
仿真模型

LP8758-E0 PSpice Transient Model

SNVMAW5.ZIP (278 KB) - PSpice Model
下載
仿真模型

LP8758-E0 STARTUP TINA-TI Transient Reference Design

SNVMBG7.TSC (559 KB) - TINA-TI Reference Design
下載
仿真模型

LP8758-E0 TINA-TI Transient Spice Model

SNVMBG6.ZIP (223 KB) - TINA-TI Spice Model
下載
計算工具

PEET-GUI — PMIC Efficiency Estimator Tool (PEET)

PMIC 效率估算器工具 (PEET GUI) 是一個圖形用戶界面，可根據設計條件輕松評估 PMIC 直流/直流穩壓器的效率。PEET GUI 可用于單獨配置每個直流/直流穩壓器，并以圖形和表格兩種格式提供實時效率和功耗數據。
在云中評估
封裝 引腳 CAD 符號、封裝和 3D 模型
DSBGA (YFF) 35 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

可獲得 TI 工程師技術支持的 TI E2E? 論壇

所有內容均由 TI 和社區貢獻者按“原樣”提供，并不構成 TI 規范。請參閱使用條款。

如果您對質量、包裝或訂購 TI 產品有疑問，請參閱 TI 支持。??????????????

視頻