CC2510F8
- Radio
- High-performance RF transceiver based on the
market-leading CC2500 - Excellent receiver selectivity and blocking
performance - High sensitivity (?103 dBm at 2.4 kBaud)
- Programmable data rate up to 500 kBaud
- Programmable output power up to 1 dBm for all
supported frequencies - Frequency range: 2400 - 2483.5 MHz
- Digital RSSI / LQI support
- High-performance RF transceiver based on the
- Current Consumption
- Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
TX: 16 mA @ ?6 dBm output power) - 0.3 μA in PM3 (the operating mode with the lowest power consumption)
- Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
- MCU, Memory, and Peripherals
- High performance and low power 8051 microcontroller core.
- 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
- Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
- I2S interface
- 7 – 12 bit ADC with up to eight inputs
- 128-bit AES security coprocessor
- Powerful DMA functionality
- Two USARTs
- 16-bit timer with DSM mode
- Three 8-bit timers
- Hardware debug support
- 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
- General
- Wide supply voltage range (2.0V - 3.6V)
- Green package: RoHS compliant and no antimony or bromine,
6×6mm QFN 36
The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.
The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.
技術文檔
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
SWRC117 — CC1110, CC2510 Basic Software Examples
支持的產品和硬件
產品
Sub-1GHz 無線 MCU
其他無線產品
SIMPLICITI — 符合 SimpliciTI 的協議堆棧
SimpliciTI 經過專門設計,可以輕松地實施并即時部署在多個 TI 射頻平臺上,如 MSP430 系列低功率 MCU、CC1XXX/CC25XX/CC430 收發器和 SoC。樣片應用在多個硬件平臺上即開即用:
- SmartRF04 + CC2430EM 開發板
- (...)
PACKET-SNIFFER — SmartRF? Packet Sniffer 2.18.1
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
支持的產品和硬件
產品
低功耗 2.4GHz 產品
Sub-1GHz 無線 MCU
Sub-1GHz 收發器
其他無線產品
汽車類無線連接產品
硬件開發
評估板
開發套件
軟件
軟件編程工具
計算工具
驅動程序或庫
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF? Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
支持的產品和硬件
產品
MSP430 微控制器
低功耗 2.4GHz 產品
Sub-1GHz 無線 MCU
Sub-1GHz 收發器
其他無線產品
汽車類無線連接產品
硬件開發
開發套件
評估板
接口適配器
子卡
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimpleLink??CC2xxx 器件的硬件設計審查
開始使用
申請審查 2.4GHz 硬件設計前,應在我們的 E2E 論壇上提交一般設計問題。
請確保您已準備好所需的文檔,隨硬件設計審查申請表一起發送:
- 確認已查看產品頁面上的所有硬件文檔,包括數據表、設計指南、用戶指南和其他硬件資源
- 提供可移植文檔格式 (PDF) 版本的原理圖
- 提供物料清單 (BOM)
- 提供審查所需的各種詳細信息
- 提供審查所需的電路板設計(包括器件配置和引用標識符)的 Gerber 文件
- (...)
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| VQFN (RHH) | 36 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點