CC115L
- KEY FEATURES
- Programmable Output Power up to +12 dBm for all Supported Frequencies
- Programmable Data Rate from 0.6 to 600 kbps
- Frequency Bands: 300 - 348 MHz, 387 - 464 MHz, and 779 - 928 MHz
- 2-FSK, 4-FSK, GFSK, MSK, and OOK Supported
- DIGITAL FEATURES
- Flexible Support for Packet Oriented Systems
- On-chip Support for Sync Word Insertion, Flexible Packet Length, and Automatic CRC Calculation
- LOW-POWER FEATURES
- 200 nA Sleep Mode Current Consumption
- Fast Startup Time; 240 μs From Sleep to TX Mode
- 64-byte TX FIFO
- Few External Components; Fully Integrated Frequency Synthesizer
- Green Package: RoHS Compliant and No Antimony or Bromine
- Small Size (QLP 4x4 mm Package, 20 pins)
- Suited for Systems Targeting Compliance with EN 300 220 (Europe) and FCC CFR Part 15 (US)
- Support for Asynchronous and Synchronous Serial Transmit Mode for Backwards Compatibility with Existing Radio Communication Protocols
The CC115L is a cost optimized sub-1 GHz RF transmitter. The circuit is based on the popular CC1101 RF transceiver, and RF performance characteristics are identical. The CC115L value line transmitter together with the CC113L value line receiver enables a low cost RF link.
The RF transmitter is integrated with a configurable baseband modulator. The modem supports various modulation formats and has a configurable data rates from 0.6 to 600 kbps.
CC115L provides extensive hardware support for packet handling, data buffering and burst transmissions.
The main operating parameters and the 64- byte transmit FIFO of CC115L can be controlled via an SPI interface. In a typical system, the CC115L will be used together with a microcontroller and a few additional passive components.
技術文檔
| 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 數據表 | CC115L Value Line Transmitter 數據表 (Rev. B) | PDF | HTML | 2014年 5月 8日 | ||
| * | 勘誤表 | CC115L Errata Notes | 2011年 5月 26日 | |||
| 選擇指南 | Leitfaden zur Auswahl drahtloser Kommunikationstechnologie (Rev. B) | 2022年 3月 7日 | ||||
| 選擇指南 | 無線連接技術選擇指南 (Rev. B) | 英語版 (Rev.B) | 2022年 3月 7日 | |||
| 選擇指南 | 無線連線技術選擇指南 (Rev. B) | 2022年 3月 7日 | ||||
| 選擇指南 | ?? ?? ?? ?? ??? (Rev. B) | 2022年 3月 7日 | ||||
| 應用手冊 | Debugging Communication Range (Rev. A) | PDF | HTML | 2019年 5月 23日 | |||
| 白皮書 | Migrating your proprietary solution to the SimpleLink? WMCU | 2018年 11月 7日 | ||||
| 應用手冊 | CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) | 2017年 10月 2日 | ||||
| 應用手冊 | TI LPRF EASYMODE | 2014年 12月 12日 | ||||
| 應用手冊 | DN038 -- Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz | 2012年 11月 27日 |
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
SMARTRFTRXEBK — SmartRF 收發器評估板
SmartRF 收發器評估板 (TrxEB) 旨在與德州儀器 (TI) 的低功耗射頻收發器搭配使用,從而開展評估、性能測試和軟件開發。
支持以下收發器評估模塊:
- CC1101EM*
- CC11xLEM*
- CC112xEM*
- CC1175EM*
- CC1200EM*
- CC2500EM
- CC2520EM
(*) 同時支持所有頻率變化以及與 CC1190 的組合
此類評估模塊可在 TI 商店中作為 EMK(評估模塊套件)單獨進行購買。
SmartRF TrxEB 有何用途?
- 在 MSP430F5438A MCU 上開發無線電協議。請參閱相關收發器網頁上的代碼示例。
- 通過 SmartRF Studio 來評估收發器的性能。
- 將通過 (...)
SWRC219 — TrxEB RF PER Test Software
支持的產品和硬件
產品
Sub-1GHz 收發器
硬件開發
開發套件
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF? Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
支持的產品和硬件
產品
MSP430 微控制器
低功耗 2.4GHz 產品
Sub-1GHz 無線 MCU
Sub-1GHz 收發器
其他無線產品
汽車類無線連接產品
硬件開發
開發套件
評估板
接口適配器
子卡
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink??CC1xxx 器件的硬件設計審查
- 第 1 步:在申請審核前,重要的一點是審核相應產品頁面上的技術文檔和設計與開發資源(請參閱下面的 CC1xxx 產品頁面鏈接)。
- 第 2 步:下載并填寫硬件設計評審申請表。
- 第 3 步:通過電子郵件將填寫好的硬件設計審查申請表和所需文檔發送至:connectivity-sub1ghz-hw-review@list.ti.com
在 SimpleLink 硬件設計審查流程中,您可與主題專家一對一溝通,專家會幫您審查設計并提供重要反饋。在此處可找到申請審核的簡單 3 步流程以及指向相關技術文檔和資源的鏈接。
申請審查 Sub-1GHz (...)
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| VQFN (RGP) | 20 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。