AFE159RP3

正在供貨

具有呼吸、起搏器、導聯脫落和導聯質量檢測以及 FIFO 功能的低功耗 3 通道 ECG AFE

產品詳情

Applications AEDs, ECG patch, EEG, EMG, Evoked audio potential (EAP), Fetal ECG, Holter monitor and multi-lead patch, Patient monitoring, Respiration, Sleep study monitor, Telemedicine bispectral index (BIS) Number of input channels 3 Resolution (Bits) 24 Interface type SPI Operating temperature range (°C) -20 to 85 Rating Catalog
Applications AEDs, ECG patch, EEG, EMG, Evoked audio potential (EAP), Fetal ECG, Holter monitor and multi-lead patch, Patient monitoring, Respiration, Sleep study monitor, Telemedicine bispectral index (BIS) Number of input channels 3 Resolution (Bits) 24 Interface type SPI Operating temperature range (°C) -20 to 85 Rating Catalog
DSBGA (YAF) 49 13.387056 mm2 3.694 x 3.624
  • Integrated Signal Chain for ECG, Pace Detection, and Respiration Measurement
  • ECG Receiver
    • Four high resolution channels at low power of 0.42mW/channel
    • Flexible four leads selectable from six electrodes
    • Programmable gain: 1.25 to 9
    • Input-referred noise: 4μVPP in 150Hz BW
    • Differential input range: ±1V with Gain = 4
    • CMRR: -140dB
    • Data rate: 125SPS to 128kSPS
  • Pace Detection
    • On-chip digital pace detection algorithm on programmable two leads
    • High-speed 128kSPS pace output on two channels for software pace detection
  • Respiration
    • Low-noise of 24mΩPP with 2kΩ body impedance and 1kΩ defibrillator protection resistor on each electrode
    • Supports Sine and Square wave excitation
  • Other Features
    • Built-in right leg drive amplifier steerable to any electrode
    • DC lead-off detection, AC lead impedance detection, Wilson Center Terminal (WCT), Goldberger Central Terminals (GCT), test signals
    • Battery voltage monitoring
    • Flexible power-down and standby modes
    • Built-in oscillator, PLL, and reference
    • 1k sample main FIFO and 2k sample pace FIFO
    • SPI-compatible serial interface
    • Analog supply voltage 1: 3.15V to 5.25V
    • Analog supply voltage 2: 1.7V to 1.9V
    • I/O supply voltage: 1.65V to 3.6V
  • Supports systems meeting AAMI EC11, AMI EC13, AMI EC38, IEC60601-1, IEC60601-2-25, IEC60601-2-27, and IEC60601-2-51 standards
  • Integrated Signal Chain for ECG, Pace Detection, and Respiration Measurement
  • ECG Receiver
    • Four high resolution channels at low power of 0.42mW/channel
    • Flexible four leads selectable from six electrodes
    • Programmable gain: 1.25 to 9
    • Input-referred noise: 4μVPP in 150Hz BW
    • Differential input range: ±1V with Gain = 4
    • CMRR: -140dB
    • Data rate: 125SPS to 128kSPS
  • Pace Detection
    • On-chip digital pace detection algorithm on programmable two leads
    • High-speed 128kSPS pace output on two channels for software pace detection
  • Respiration
    • Low-noise of 24mΩPP with 2kΩ body impedance and 1kΩ defibrillator protection resistor on each electrode
    • Supports Sine and Square wave excitation
  • Other Features
    • Built-in right leg drive amplifier steerable to any electrode
    • DC lead-off detection, AC lead impedance detection, Wilson Center Terminal (WCT), Goldberger Central Terminals (GCT), test signals
    • Battery voltage monitoring
    • Flexible power-down and standby modes
    • Built-in oscillator, PLL, and reference
    • 1k sample main FIFO and 2k sample pace FIFO
    • SPI-compatible serial interface
    • Analog supply voltage 1: 3.15V to 5.25V
    • Analog supply voltage 2: 1.7V to 1.9V
    • I/O supply voltage: 1.65V to 3.6V
  • Supports systems meeting AAMI EC11, AMI EC13, AMI EC38, IEC60601-1, IEC60601-2-25, IEC60601-2-27, and IEC60601-2-51 standards

The AFE1594 is a family of multichannel, simultaneous sampling, 24-bit, delta-sigma (ΔΣ) analog-to-digital converters (ADCs) with built-in programmable gain Instrumentation Amplifiers (INAs), internal reference, and an on-chip PLL. The AFE supports digital pace pulse detection, thoracic impedance measurement and incorporates all of the features that are commonly required in medical electrocardiogram (ECG) and electroencephalogram (EEG) applications. Multiple AFE159x devices can be cascaded in high channel count systems. With high levels of integration and exceptional performance, the AFE159x enables the development of scalable medical instrumentation systems at significantly reduced size, power, and overall cost.

The AFE1594 is a family of multichannel, simultaneous sampling, 24-bit, delta-sigma (ΔΣ) analog-to-digital converters (ADCs) with built-in programmable gain Instrumentation Amplifiers (INAs), internal reference, and an on-chip PLL. The AFE supports digital pace pulse detection, thoracic impedance measurement and incorporates all of the features that are commonly required in medical electrocardiogram (ECG) and electroencephalogram (EEG) applications. Multiple AFE159x devices can be cascaded in high channel count systems. With high levels of integration and exceptional performance, the AFE159x enables the development of scalable medical instrumentation systems at significantly reduced size, power, and overall cost.

下載 觀看帶字幕的視頻 視頻
Request more information

The full data sheet is available. Request now

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 1
類型 標題 下載最新的英語版本 日期
* 數據表 AFE159x Low-Power, 4-Channel, 24-Bit Analog Front-Ends for Bio-Potential Measurements 數據表 (Rev. A) PDF | HTML 2024年 11月 12日

設計和開發

如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。

評估板

AFE1594EVM — AFE1594 評估模塊

AFE1594 評估套件是一款開發平臺,可用于評估適用于患者監護和診斷應用的 AFE1594 的性能。AFE1594 是多通道同步采樣 24 位 Δ-Σ 模數轉換器 (ADC) 系列,此系列 ADC 具有內置可編程增益儀表放大器 (INA),內部基準以及片上時鐘。AFE 將心電圖 (ECG) 和腦電圖 (EEG) 等醫療應用所需的所有常見功能集于一身。憑借高集成度以及出色的性能,AFE1594 能夠以大幅縮小的尺寸、更低的功耗和整體成本,實現可擴展醫療儀器系統的開發。
驅動程序或庫

AFE159RP4-DESIGN AFE159RP4 design resources

The full data sheet and other design resources for this device are available here.
支持的產品和硬件

支持的產品和硬件

產品
生物傳感 AFE
AFE1594 具有導聯脫落和導聯質量檢測以及 FIFO 功能的低功耗 4 通道 ECG AFE AFE159P4 具有起搏器、導聯脫落和導聯質量檢測以及 FIFO 功能的低功耗 4 通道 ECG AFE AFE159RP3 具有呼吸、起搏器、導聯脫落和導聯質量檢測以及 FIFO 功能的低功耗 3 通道 ECG AFE AFE159RP4 具有呼吸、起搏器、導聯脫落和導聯質量檢測以及 FIFO 功能的低功耗 4 通道 ECG AFE
硬件開發
評估板
AFE1594EVM AFE1594 評估模塊
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用,包括業內超大的模型庫之一,涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
封裝 引腳 CAD 符號、封裝和 3D 模型
DSBGA (YAF) 49 Ultra Librarian

訂購和質量

包含信息:
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息:
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻