SNVU754A October 2021 – November 2021 LM5013-Q1
3.1 Quick Start Procedure
- Connect the voltage supply between VIN and GND connectors using short wires.
- Connect the load of the converter between VOUT and GND connectors using short wires.
- Set the supply voltage (VVIN) at an appropriate level between 15-V to 100-V. Set the current limit of the supply to an appropriate level as well.
- Turn on the power supply. The EVM powers up and provides VOUT = 12-V.
- Monitor the output voltage while increasing the load current to max.
See Figure 3-1 for the location of the connectors.
Figure 3-1 LM5013-Q1 EVM Top View