SLUSFS4A September 2025 – September 2025 UCC27734-Q1 , UCC27735-Q1
PRODUCTION DATA
- 1
- 1 Features
- 2 Applications
- 3 Description
- 4 Pin Configuration and Functions
- 5 Specifications
-
6 Detailed Description
- 6.1 Overview
- 6.2 Functional Block Diagram
- 6.3
Feature Description
- 6.3.1 Input Stages and Interlock
- 6.3.2 Enable Function (UCC277x5-Q1 Only)
- 6.3.3 Undervoltage Lockout (UVLO)
- 6.3.4 Level Shifter
- 6.3.5 Output Stage
- 6.3.6 Low Propagation Delays and Tightly Matched Outputs
- 6.3.7 HS Node dV/dt
- 6.3.8 Split Grounds (COM and VSS)
- 6.3.9 Operation Under Negative HS Voltage Condition
- 6.4 Device Functional Modes
-
7 Application and Implementation
- 7.1 Application Information
- 7.2
Typical Application
- 7.2.1 Design Requirements
- 7.2.2
Detailed Design Procedure
- 7.2.2.1 Selecting HI and LI Low Pass Filter Components (RHI, RLI, CHI, CLI)
- 7.2.2.2 Selecting Bootstrap Capacitor (CBOOT)
- 7.2.2.3 Selecting VDD Bypass Capacitor (CVDD)
- 7.2.2.4 Selecting Bootstrap Resistor (RBOOT)
- 7.2.2.5 Selecting Gate Resistor RHO/RLO
- 7.2.2.6 Selecting Bootstrap Diode
- 7.2.2.7 Estimate the UCC2773x-Q1 Power Losses
- 7.2.2.8 Application Example Schematic Note
- 7.2.3 Application Curves
- 7.3 Power Supply Recommendations
- 7.4 Layout
- 8 Device and Documentation Support
- 9 Revision History
- 10Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
- D|8
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
7.2 Typical Application
The circuit in Figure 7-1 shows two UCC2773x-Q1 in a phase shifted full bridge setup converting 370V to 410V DC into 12V while driving up to 50A output current. The UCC27624 drives the secondary side. All gate drivers are controlled by the UCC28950. The leading leg is shown in detail.
Figure 7-1 Typical Application Schematic