4 Revision History

Changes from Revision D (October 2016) to Revision E (May 2017)

• Changed R_VBUS values From: MIN = 891, TYP = 900, MAX = 909 KΩ To: MIN = 855, TYP = 887, MAX = 920 KΩ Go

Changes from Revision C (September 2016) to Revision D (October 2016)

• Changed text for Pin 7 in the Pin Functions table From: "default current mode detected (H); medium or high current mode detected (L)." To: "Refer to Table 7-3 for more details."Go
• Changed text for Pin 8 in the Pin Functions table From: "default or medium current mode detected (H); high current mode detected (L)." To: "Refer to Table 7-3 for more details."Go

Changes from Revision B (March 2016) to Revision C (September 2016)

• Changed pins CC1 and CC2 values From: MIN = -0.3 MAX = V_DD + 0.3 To: MIN -0.3 MAX = 6 in the Section 6.1 Go

Changes from Revision A (June 2015) to Revision B (March 2016)

• Added Note 1 and 2 to the Pin Functions tableGo
• Changed the DESCRIPTION of pin EN_N pin in the Pin Functions tableGo
• Changed the DESCRIPTION of pin V_DD in the Pin Functions tableGo
• Changed the MIN, TYP, and MAX values for V_{TH_UFP_CC_USB}, V_{TH_UFP_CC_MED}, and V_{TH_UFP_CC_HIGH} in the Section 6.5 table.Go
• Added Test Condition "See Figure 6-1" to V_{BUS_THR} in the Section 6.5 Go
• Added Note 2 to the Section 6.5 table Go
• Updated Section 6.6 table with new values.Go
• Added Data hold time, Data valid time, Data valid acknowledge time, and C_{bus_400kHz} values to Section 6.6 table.Go
• Changed the Section 6.7 table Go
• Added Note: "SW must make sure..." to the Description of INTERRUPT_STATUS in Table 7-7 Go
• Added text to list item 2 in the Section 8.3 sectionGo

Changes from Revision * (May 2015) to Revision A (June 2015)

• 將 TUSB320 的器件狀態從產品預發布 更改為量產數據 Go