欧美性爽xyxoooo,国产亚洲精品二区综合,亚洲精品白浆高清久久久久久

ZHCSSB2G march 2008 – june 2023 TPS799-Q1

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

DDC|5
- MPDS123G
DRV|6
- MPDS216E

散熱焊盤機械數據 (封裝 | 引腳)

DRV|6
- QFND087M

訂購信息

6.5 Electrical Characteristics

over operating temperature range (T_J = –40°C to 125°C), V_IN = V_OUT(TYP) + 0.3 V or 2.7 V, whichever is greater; I_OUT = 1 mA, V_EN = V_IN, C_OUT = 2.2 μF, and C_NR = 0.01 μF (unless otherwise noted); for TPS79901-Q1, V_OUT = 3 V; typical values are at T_J = 25°C

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
V_IN	Input voltage range⁽¹⁾			2.7		6.5	V
V_FB	Internal reference (TPS79901-Q1)			1.169	1.193	1.217	V
V_OUT	Output voltage range (TPS79901-Q1)			V_FB		6.5 – V_DO	V
V_OUT	Output accuracy	Nominal, T_J = 25°C		–1%		1%
V_OUT	Output accuracy⁽¹⁾	Over V_IN, I_OUT, temperature, V_OUT + 0.3 V ≤ V_IN≤ 6.5 V, 500 μA ≤ I_OUT ≤ 200 mA		–2%	±1%	2%
ΔV_OUT%/ ΔV_IN	Line regulation⁽¹⁾	V_OUT(NOM) + 0.3 V ≤ V_IN ≤ 6.5 V			0.02		%/V
ΔV_OUT%/ ΔI_OUT	Load regulation	500 μA ≤ I_OUT ≤ 200 mA			0.002		%/mA
V_DO	Dropout voltage⁽²⁾ (V_IN = V_OUT(NOM) – 0.1 V)	V_OUT < 3.3 V	I_OUT = 200 mA		100	175	mV
V_DO	Dropout voltage⁽²⁾ (V_IN = V_OUT(NOM) – 0.1 V)	V_OUT ≥ 3.3 V	I_OUT = 200 mA		90	160	mV
I_CL	Output current limit	V_OUT = 0.9 × V_OUT(NOM)		200	400	600	mA
I_GND	Ground pin current	500 μA ≤ I_OUT ≤ 200 mA			40	60	μA
I_SHDN	Shutdown current (I_GND)	V_EN ≤ 0.4 V, 2.7 V ≤ V_IN ≤ 6.5 V			0.15	1	μA
I_FB	Feedback pin current (TPS79901-Q1)			–0.5		0.5	μA
PSRR	Power-supply rejection ratio	V_IN = 3.85 V, V_OUT = 2.85 V, C_NR = 0.01 μF, I_OUT = 100 mA	f = 100 Hz		70		dB
			f = 1 kHz		66
			f = 10 kHz		51
			f = 100 kHz		38
V_N	Output noise voltage BW = 10 Hz to 100 kHz, V_OUT = 2.8 V	C_NR = 0.01 μF			10.5 V_OUT		μV_RMS
V_N	Output noise voltage BW = 10 Hz to 100 kHz, V_OUT = 2.8 V	C_NR = none			94 V_OUT		μV_RMS
T_STR	Start-up time	V_OUT = 2.85 V, R_L = 14 ?, C_OUT = 2.2 μF	C_NR = 0.001 μF		45		μs
			C_NR = 0.047 μF		45
			C_NR = 0.01 μF		50
			C_NR = none		50
V_EN(HI)	Enable high (enabled)			1.2		V_IN	V
V_EN(LO)	Enable low (shutdown)			0		0.4	V
I_EN(HI)	Enable pin current, enabled	V_EN = V_IN = 6.5 V			0.03	1	μA
TSD	Thermal shutdown temperature	Shutdown, temperature increasing			165		°C
TSD	Thermal shutdown temperature	Reset, temperature decreasing			145		°C
T_J	Operating junction temperature			–40		125	°C
V_UVLO	Undervoltage lockout	V_IN rising		1.9	2.2	2.65	V
V_UVLO,hys	Hysteresis	V_IN falling			70		mV

(1) Minimum V_IN = V_OUT + V_DO or 2.7 V, whichever is greater.

(2) V_DO is not measured for devices with V_OUT(NOM) < 2.8 V because minimum V_IN = 2.7 V.