9 Revision History
Changes from Revision E (September 2013) to Revision F (January 2024)
- 更新了整個文檔中的表格、圖和交叉參考的編號格式Go
- Updated to new format which does not include specific parameter names and
does include min and max columns. TJ called out in header. Pin names are used rather
than signal names. BOOT and PH voltages now marked as output voltage. Footnotes updated
and Note 2 removed.Go
- Changed BOOT to PH Absolute Maximum to 6 V maximumGo
- Deleted Absolute Maximum BOOT to GND maximum voltageGo
- Added ESD tableGo
- Added Recommended operating VI input voltageGo
- Updated footnotes to match current TI standards, replaced custom board specifications with EVM information and JEDEC standard information.Go
- Changed RθJC(top), RθJB, ψJT,
ψJB
Go
- Added condition for typical specifications EC table’s header, added parameter names, and used pin names in parameter descriptions. Footnote added.Go
- Updated the following test conditions: VFB, DMAX, and RDSON(HS).Go
- Updated the following typical specifications in the EC table:
IQ(VIN), ISD(VIN), VINUVLO(H), VEN(H), and
RDSON(HS).Go
Changes from Revision D (January 2013) to Revision E (September 2013)
- 刪除了數據表標題、特性和說明中的 SWIFTGo
- 刪除了特性“SWIFT 文檔”Go
- 刪除了文本“作為 SWIFT? 直流/直流穩壓器產品系列的一員”Go
Changes from Revision C (October 2007) to Revision D (January 2013)
- Replaced the DISSIPATION RATINGS with the THERMAL INFORMATION
tableGo
Changes from Revision B (November 2006) to Revision C (October 2007)
- Changed From: KIND = 0.2, and the minimum inductor value is 31 μH To: KIND = 0.2, and the minimum inductor value is 27 μHGo