ZHCSHX8D September 2017 – October 2019 TPS50601A-SP
PRODUCTION DATA.
This example highlights a design using the TPS50601A-SP based on its evaluation module. For more details, please refer to the EVM user's guide, SLVUB65. A few parameters must be known in order to start the design process. These parameters are typically determined at the system level. For this example, we start with the following known parameters:
| DESIGN PARAMETER | EXAMPLE VALUE |
|---|---|
| Output voltage | 2.5 V |
| Maximum output current | 6 A |
| Transient response 1-A load step | ΔVOUT = 5% |
| Input voltage | 5-V nominal, 4.5 V to 7 V |
| Output voltage ripple | 20 mVp-p |
| Start input voltage (rising VIN) | 4.5 V |
| Stop input voltage (falling VIN) | 4.3 V |
| Switching frequency | 100 kHz |