4 修訂歷史記錄

Changes from C Revision (August 2018) to D Revision

• 向器件信息 表中添加了注釋：重量 = 1.22gGo
• Changed the Pin Configuration imageGo
• Changed SYNC out high level threshold MIN value From: 2 V To: V_IN - 0.3 in the Electrical Characteristics tableGo
• Deleted test Condition "Percent of program frequency" from SYNC in frequency range in the Electrical Characteristics tableGo
• Changed "180° out of phase to the internal 500-kHz switching frequency." To: "180° in phase to the internal 500-kHz switching frequency." in the Description of Table 3Go
• Changed "180° out of phase respect to the internal oscillator.." To: "180° in phase respect to the internal oscillator.." in the Parallel Operation sectionGo
• Changed "(180° out of phase respect to the master device)." To: "(180° in phase respect to the master device).." in the Parallel Operation sectionGo

Changes from B Revision (June 2018) to C Revision

• Replaced all coordinates in Bond Pad Coordinates in Microns table with corrected valuesGo

Changes from A Revision (March 2018) to B Revision

• Added Bare Die Information tableGo
• Added Bond Pad Coordinates in Microns tableGo

Changes from * Revision (September 2017) to A Revision

• Changed 將器件狀態(tài)從高級信息 更改為生產(chǎn)數(shù)據(jù)Go