ZHCSIV1F September 2018 – February 2023 TPS1663
PRODUCTION DATA
請參考 PDF 數據表獲取器件具體的封裝圖。
The RPGOOD serves as pull-up for the open-drain output. The current sink by this pin must not exceed 10 mA (see the Absolute Maximum Ratings table). TI recommends typical resistance value in the range of 10 kΩ to 100 kΩ for RPGOOD. Figure 10-5 and Figure 10-7 illustrate the power up and power down performance of the system respectively. The CIN is a local bypass capacitor to suppress noise at the input. TI recommends a minimum of 0.1 μF for C(IN).