4 修訂歷史記錄
Changes from D Revision (August 2016) to E Revision
-
Added Note 3 to the Electrical Characteristics tableGo
-
Deleted text "which is needed for certain HDMI CTS test." from the second paragraph in the Overview sectionGo
-
Changed section: Input Signal Detect BlockGo
-
Changed H to X in the first row of the HPD_SNK column in Table 36Go
-
Changed the IN_Dx column in Table 36Go
Changes from C Revision (April 2016) to D Revision
-
Recommended Operating Conditions, Changed the CONTROL PINS sectionGo
-
Electrical Characteristics Changed the DDC and I2C sectionGo
Changes from B Revision (February 2016) to C Revision
-
Changed pin 36 Description From: TX_TERM_CTL = L: 150 - 300 Ω To: TX_TERM_CTL = L: Reserved in the Pin Functions table Go
-
Added OE to VIL "Low-level input voltage" in the Recommended Operating Conditions table Go
-
Added OE to VIH "High-level input voltage" in the Recommended Operating Conditions table Go
-
Changed Figure 23 Go
-
Deleted the VDD_ramp and VCC_ramp MIN values in Table 1 Go
-
Changed TX_TERM_CTL = L to Reserved in Table 3 Go
-
Changed text "address 22h through the I2C interface" To: "address 0Bh through the I2C interface" DDC Functional DescriptionGo
-
Added Note to 11–400-kbps in Table 8Go
-
Added Note to 11–400-kbps in Table 10Go
Changes from A Revision (December 2015) to B Revision
-
Changed Pin 44 From: AUX_SRCn To: ARC_OUT Pin 45 From: AUX_SRCn To: SPDIF_IN in the Pin Configuration and Functions image Go
Changes from * Revision (October 2015) to A Revision