欧美精品综合另类,亚洲国产精品二二三三区,欧美大波少妇在厨房被

ZHCSWS8E September 2010 – October 2024 SN65HVD1780-Q1 , SN65HVD1781-Q1 , SN65HVD1782-Q1

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

D|8
- MSOI002K

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

5.6 Electrical Characteristics

over recommended operating conditions (unless otherwise noted)

PARAMETER		TEST CONDITIONS			MIN	TYP	MAX	UNIT
\|V_OD\|	Driver differential output voltage magnitude	R_L = 60 Ω, 4.75 V ≤ V_CC 375 Ω on each output to –7 V to 12 V, SeeFigure 6-1		T_A < 85°C	1.5			V
				T_A < 125°C	1.4
		R_L = 54 Ω, 4.75 V ≤ V_CC ≤ 5.25 V		T_A < 85°C	1.7	2
		R_L = 54 Ω, 4.75 V ≤ V_CC ≤ 5.25 V		T_A < 125°C	1.5
		R_L = 54 Ω, 3.15 V ≤ V_CC ≤ 3.45 V			0.8	1
		R_L = 100 Ω, 4.75 V ≤ V_CC ≤ 5.25 V		T_A < 85°C	2.2	2.5
		R_L = 100 Ω, 4.75 V ≤ V_CC ≤ 5.25 V		T_A < 125°C	2
Δ\|V_OD\|	Change in magnitude of driver differential output voltage	R_L = 54 Ω			–50	0	50	mV
V_OC(SS)	Steady-state common-mode output voltage				1	V_CC/2	3	V
ΔV_OC	Change in differential driver output common-mode voltage				–50	0	50	mV
V_OC(PP)	Peak-to-peak driver common-mode output voltage	Center of two 27-Ω load resistors, See Figure 6-2				500		mV
C_OD	Differential output capacitance					23		pF
V_IT+	Positive-going receiver differential input voltage threshold					–100	–35	mV
V_IT–	Negative-going receiver differential input voltage threshold				–180	–150		mV
V_HYS	Receiver differential input voltage threshold hysteresis (V_IT+ – V_IT–)⁽¹⁾				30	50		mV
V_OH	Receiver high-level output voltage	I_OH = –8 mA			2.4	V_CC – 0.3		V
V_OL	Receiver low-level output voltage	I_OL = 8 mA	T_A < 85°C			0.2	0.4	V
V_OL	Receiver low-level output voltage	I_OL = 8 mA	T_A < 125°C				0.5	V
I_I(LOGIC)	Driver input, driver enable, and receiver enable input current				–50		50	μA
I_OZ	Receiver output high-impedance current	V_O = 0 V or V_CC, RE at V_CC			–1		1	μA
I_OS	Driver short-circuit output current				–200		200	mA
I_I(BUS)	Bus input current (disabled driver)	V_CC = 3.15 to 5.5 V or V_CC = 0 V, DE at 0 V	V_I = 12 V	HVD1780-Q1, HVD1781-Q1		75	100	μA
			V_I = 12 V	HVD1782-Q1		400	500
			V_I = –7 V	HVD1780-Q1, HVD1781-Q1	–60	–40
			V_I = –7 V	HVD1782-Q1	-400	-300
I_CC	Supply current (quiescent)	Driver and receiver enabled	DE = V_CC, RE = GND, no load			4	6	mA
		Driver enabled, receiver disabled	DE = V_CC, RE = V_CC, no load			3	5
		Driver disabled, receiver enabled	DE = GND, RE = GND, no load			2	4
		Driver and receiver disabled, standby mode	DE = GND, D = open, RE = V_CC, no load, T_A < 85°C			0.15	1	μA
		Driver and receiver disabled, standby mode	DE = GND, D = open, RE = V_CC, no load, T_A < 125°C				12	μA
	Supply current (dynamic)	See the Typical Characteristics section

(1) Specified by design. Not production tested.