ZHCSE75D September 2015 – June 2018 LMZ36002
PRODUCTION DATA.
The VADJ pin sets the output voltage of the LMZ36002. The output voltage adjustment range is from 2.5 V to 7.5 V. The switching frequency range for any output voltage must be determined from Table 4 or Table 5. The adjustment method requires the addition of RSET, which sets the output voltage, and the connection of SENSE+ to VOUT. The RSET resistor must be connected directly between the VADJ (pin 24) and AGND. The SENSE+ pin (pin 22) must be connected to VOUT either at the load for improved regulation or at VOUT of the device. Table 1 lists the standard external RSET resistor for a number of common bus voltages.
| OUTPUT VOLTAGE VOUT (V) | |||||
|---|---|---|---|---|---|
| 2.5 | 3.3 | 5.0 | 6.0 | 7.5 | |
| RSET (kΩ) | 13.7 | 8.87 | 5.11 | 4.02 | 3.09 |
For other output voltages, the value of the required resistor can either be calculated using the following formula, or simply selected from the range of values given in Table 2.
| VOUT (V) | RSET (kΩ) | VOUT (V) | RSET (kΩ) | |
|---|---|---|---|---|
| 2.5 | 13.7 | 5.1 | 4.99 | |
| 2.6 | 12.7 | 5.2 | 4.87 | |
| 2.7 | 11.8 | 5.3 | 4.75 | |
| 2.8 | 11.3 | 5.4 | 4.64 | |
| 2.9 | 10.7 | 5.5 | 4.53 | |
| 3.0 | 10.2 | 5.6 | 4.42 | |
| 3.1 | 9.76 | 5.7 | 4.32 | |
| 3.2 | 9.31 | 5.8 | 4.22 | |
| 3.3 | 8.87 | 5.9 | 4.12 | |
| 3.4 | 8.45 | 6.0 | 4.02 | |
| 3.5 | 8.06 | 6.1 | 3.97 | |
| 3.6 | 7.87 | 6.2 | 3.92 | |
| 3.7 | 7.50 | 6.3 | 3.83 | |
| 3.8 | 7.32 | 6.4 | 3.74 | |
| 3.9 | 6.98 | 6.5 | 3.65 | |
| 4.0 | 6.81 | 6.6 | 3.61 | |
| 4.1 | 6.49 | 6.7 | 3.57 | |
| 4.2 | 6.34 | 6.8 | 3.48 | |
| 4.3 | 6.19 | 6.9 | 3.40 | |
| 4.4 | 5.90 | 7.0 | 3.36 | |
| 4.5 | 5.76 | 7.1 | 3.32 | |
| 4.6 | 5.62 | 7.2 | 3.24 | |
| 4.7 | 5.49 | 7.3 | 3.20 | |
| 4.8 | 5.36 | 7.4 | 3.16 | |
| 4.9 | 5.23 | 7.5 | 3.09 | |
| 5.0 | 5.11 |